Team BKool CycleChat

[theboxers]

The shaft has a small hex head at the base

Yay found the mini tool kit with a hex small enough.

What Randy said, there is a grub screw holding it on.
If you work somewhere with a maintenance work shop take it is, they may well be able to add same material and re-cut the thread.

No one like that where I work. There are a couple of metal work shops near where I work though.

 

[CXRAndy]

Project for AAAC, get a batch of worm drives 'cnc'd' sell them for £50 each

 

[bobinski]

@theboxers just make sure you can run your set up on the kickr first. I recall you have a wide range rear cassette and a wolfson(?) extender thingy. Andy probably knows.

 

[CXRAndy]

The Kickr V3 will take 40+t on Cass. The latest kickr has flush cowling around the belt drive pulley. I trimmed mine(V1), let them know at Wahoo, redesign ed the cowling

 

[theboxers]

@theboxers just make sure you can run your set up on the kickr first. I recall you have a wide range rear cassette and a wolfson(?) extender thingy. Andy probably knows.

I've got a bike with a triple on it so can get a low gear on there if needed.

The 'road link' I have and 'wolf tooth' are what you are thinking.

 

[bobinski]

The Kickr V3 will take 40+t on Cass. The latest kickr has flush cowling around the belt drive pulley. I trimmed mine(V1), let them know at Wahoo, redesign ed the cowling

I would tap them for a climb

 

[Brendan Parker]

is there a long update required before using bsim again later trying to judge how long I need before the handicap later?

 

[bobinski]

I've got a bike with a triple on it so can get a low gear on there if needed.

The 'road link' I have and 'wolf tooth' are what you are thinking.

Thats it/them!

I know NEO can struggle with a 9 speed cassette so just being careful for ya!

 

[Brusgaard]

is there a long update required before using bsim again later trying to judge how long I need before the handicap later?

Yes @bert1971, you have to download/install 152MB.

Use this link for a painless installation: http://bsimresources.bkool.com/game/bsim2setup.exe

 

[gbrown]

As @bert1971 points out above, there may be a bkool update needed before you can join the Handicap this evening!

@BILL S are you OK to try and start the usual password protected Stouby-Sejet?

Might be best to try a test a few minutes before and see if we can see your session, just in case!

Thanks,

Geoff

 

[gbrown]

@gbrown Hi I am a member of the cyclechat chaingang and would like to join the handicap tonight as recommended @Del C. I rode Stourby-Sejet about two weeks ago in a time of 42:04. Shall I go off at zero handicap as this is the first time? Thanks

@Arkone56 Sorry about the Bkool problems last week, are you going to try and join us tonight? What's your Bkool username?

If you did a 42:04 your start time should be around 0:30 i.e. 30 seconds after the warm up ends.

Geoff

 

[gbrown]

i think i will be there - but on a neo
what do you think i should do as in start time

@berty bassett I put you up a Handicap based on last weeks time, hope to see you this evening.

 

[theboxers]

Wiggle £884.99

Theboxers bank balance £0



ETA Wednesday

 

[BILL S]

As @bert1971 points out above, there may be a bkool update needed before you can join the Handicap this evening!

@BILL S are you OK to try and start the usual password protected Stouby-Sejet?

Might be best to try a test a few minutes before and see if we can see your session, just in case!

Thanks,

Geoff

Thanks Geoff. I'm ok to start the session and will do a test start at 6:40 to make sure others are able to join. As soon as others have joined I will abandon that test session and start the real one at 6:50 and will post on here that all is well. If there's a problem, maybe someone else @bridgy could start the session instead as that worked for us on Saturdays re-run.
Please can we have some of you joining my test session so I'll know if you can find me.
I'd better remember to run the update as soon as I get home tonight. Might even get my new tyre fitted too . Hopefully saying that isn't enough to flag up a handicap increase before the race starts as I need all the help I can get these days.

 

[bridgy]

Thanks Geoff. I'm ok to start the session and will do a test start at 6:40 to make sure others are able to join. As soon as others have joined I will abandon that test session and start the real one at 6:50 and will post on here that all is well. If there's a problem, maybe someone else @bridgy could start the session instead as that worked for us on Saturdays re-run.
Please can we have some of you joining my test session so I'll know if you can find me.
I'd better remember to run the update as soon as I get home tonight. Might even get my new tyre fitted too . Hopefully saying that isn't enough to flag up a handicap increase before the race starts as I need all the help I can get these days.

Yes, I should be OK to do that Bill - fingers crossed should be OK now based on what Bkool told me, but definitely worth being sceptical!