The Bassist and Guitarist thread

Page may contain affiliate links. Please see terms for details.

Cycleops

Legendary Member
Location
Accra, Ghana
Oh dear. How do you fix this?

IMG_20230428_161411.jpg
 

MontyVeda

a short-tempered ill-controlled small-minded troll
one step forward, two steps back.

I inadvertently put a lot of little scratches in the finished top whilst shaping it, and sanding those back left it looking patchy.
I'm currently completely sanding the tru-oil finish off...

View attachment 651762

...only to put it all back on again :sad:

After spending an age sanding off the initial tru-oil finish, autumn set in, the temp dropped and humidity rose so i decided not to apply the finish until spring, and about three weeks ago I began giving it a final sand before rubbing oil all over my body. One thing I've learned about sanding is the the more polished the finish, the more those tiny hairline scratches show, so what i thought might've been a day or two sanding became a fortnight. And on top of that, the oil on the cedar top was soaking in rather patchy so after seven coats and seven days, I sanded the whole lot off (again!) and started over. It's still patchy but I'm just going to have to live with that and call it 'reliced' or something... but my oh my that cedar is thirsty! This is after about ten coats of Tru-oil... (and yes, the neck needs some work ;) )

22 about ten coats of oil on the top.jpg

But the walnut body is a different story. This is after four coats...

20 about five coats of oil on the back.jpg

21 about five coats of oil.jpg

I'll give the walnut another three or four coats and reckon the cedar might need another five to ten before it starts getting glossy. Then when the shine is the high gloss I'm after, it needs putting away for two or three weeks for the finish to fully cure, then I can start attaching the hardware.

I always said that lockdown would be a distant memory by the time I'd finished this lockdown project :blush:
 

MontyVeda

a short-tempered ill-controlled small-minded troll
All wired up and seems to be working. I had to take a photo before putting the strings on... just in case the tension destroys it.

ready for strings.jpg


not sure how long it'll take me to set it up... 10 mins according to YouTube, but knowing me, it might take another 2 years and 12 days.

Edit... well it's not snapped yet!

New member of the family...

finished... almost.jpg


Just a case of letting those strings stretch, then file the nut slots down a tad, check the neck and set the saddle.

Then try to play the sodding thing :blush:

Oh, forgot to mention, it weighs a rather hefty 4.6kg, or just over 10lbs... but it doesn't neck dive, which was my main worry about putting a full length bass neck on a telecaster sized body.
 
Last edited:

Cycleops

Legendary Member
Location
Accra, Ghana
Looks good @MontyVeda . At 4.6kg it sure won't neck dive. ^_^
My cheap P copy is nice and light but neck dives horribly.

What's the nut width? Around 43mm the same as a fender P?
What pick ups did you use?
 
Last edited:
FB_IMG_1684998123297.jpg
 

MontyVeda

a short-tempered ill-controlled small-minded troll
Ooh thats nice! Reckon i could do 'smoke on the water' thats about it :laugh:

the only thing i can play on a keyboard are those first few chords from Lean On Me... but the 101 is monophonic, so i can't even play that.

but my challenge is to try to be able to play every bassline i learn on bass, on the keyboard.

Oddly, being lefty guitar player, my right hand is gravitating towards the keys. Dunno what that's about but I'm not gonna argue with instinct.
 
Top Bottom