Tea?

Page may contain affiliate links. Please see terms for details.

Bobby Mhor

Guru
Location
Behind You
Weren't your prime some time ago now. According to you at least.
What sort of answer did you get.
How big is that lucky bear? How many do you need before you notice any effect.
Toilet roll hoarding. It'll go off before you get the chance to use it.

In me prime 60 years ago.. :cuppa:
15 mins to go.. takes 6 hrs 4 mins
It's pretty small but apparently a bit techy and that's why you get it as a test piece....
hopefully it'll finish..
if all okay, a long project already to go tomorrow.
finished...
 

classic33

Leg End Member
In me prime 60 years ago.. :cuppa:
15 mins to go.. takes 6 hrs 4 mins
It's pretty small but apparently a bit techy and that's why you get it as a test piece....
hopefully it'll finish..
if all okay, a long project already to go tomorrow.
finished...
Fair enough, say no more...
Should be finished now, just to let it cool down. And don't squish it!
You printing new parts for yourself?
 

classic33

Leg End Member
Presently trying an awfy complex job....
fingers crossed for the next nine hours:laugh::laugh:
and that is just one half:ohmy:
Intricate and large. Sounds interesting bearing in mind it's only half the story.
Couldn't manage nine hours. Just don't hover around the job in hand, it'll slow down, or maybe stop whilst you're around it.
 

Bobby Mhor

Guru
Location
Behind You
Intricate and large. Sounds interesting bearing in mind it's only half the story.
Couldn't manage nine hours. Just don't hover around the job in hand, it'll slow down, or maybe stop whilst you're around it.

As I suspected, intermittent electrical connection somewhere.
It has happened before so off back to suppliers.....
seven bleedin' hours into print, it does pause but nah, it happen just after it started again, all connections okay as started again in different socket...
oh well..
 

classic33

Leg End Member
As I suspected, intermittent electrical connection somewhere.
It has happened before so off back to suppliers.....
seven bleedin' hours into print, it does pause but nah, it happen just after it started again, all connections okay as started again in different socket...
oh well..
It's done part of the job?
You kept the packing and the box, just in case.
That far in and it decides it's had enough. Not good enough.
Just the dismantling and packing to do. Then building the replacement.

I'd not be a happy bunny at this stage.
 

Bobby Mhor

Guru
Location
Behind You
It's done part of the job?
You kept the packing and the box, just in case.
That far in and it decides it's had enough. Not good enough.
Just the dismantling and packing to do. Then building the replacement.

I'd not be a happy bunny at this stage.

**it 'appens....
Took a fair bit dismantling but Royal Mail have it so.....
Not decided what to do yet..
is it worth the hassle plus apart from what i was doing, nothing else was planned..
we'll see..
I might need a ink printer if this clean-up kit doesn't work.
Wot I was printing today, I should maybe have used one of the other plastics as the PLA (apart from being brittle )can have an effect on any antenna...
oh, well, only so many lucky Maneki Neko you can print, yesterdays definitely never held its luck...
anyhoo, busy day tomorra and an early start planned..
time to log up,
get retro prog on +1 :cuppa:
 

classic33

Leg End Member
**it 'appens....
Took a fair bit dismantling but Royal Mail have it so.....
Not decided what to do yet..
is it worth the hassle plus apart from what i was doing, nothing else was planned..
we'll see..
I might need a ink printer if this clean-up kit doesn't work.
Wot I was printing today, I should maybe have used one of the other plastics as the PLA (apart from being brittle )can have an effect on any antenna...
oh, well, only so many lucky Maneki Neko you can print, yesterdays definitely never held its luck...
anyhoo, busy day tomorra and an early start planned..
time to log up,
get retro prog on +1 :cuppa:
It does.
Which is worse. Building it in the first place, with all the careful alignment of parts or having done all that and having to pull it apart?
Those lucky cats weren't.
You not got it working yet!
What sort of effect? Signal or material.
Early rise mean early to bed, without the wealth?
All logged out...
 

Bobby Mhor

Guru
Location
Behind You
It does.
Which is worse. Building it in the first place, with all the careful alignment of parts or having done all that and having to pull it apart?
Those lucky cats weren't.
You not got it working yet!
What sort of effect? Signal or material.
Early rise mean early to bed, without the wealth?
All logged out...

Pull it apart,
at least there was some structure to building it..
I called in expert packer Mrs M to complete the job..
More research needed I think..
anyhoo, must fly..
brekkie calls
 

classic33

Leg End Member
Pull it apart,
at least there was some structure to building it..
I called in expert packer Mrs M to complete the job..
More research needed I think..
anyhoo, must fly..
brekkie calls
Soul destroying pulling it apart.
And she showed you how it should be done.
Hope that's not down those stairs. You're supposed to walk down them. Suppose you go too high and hit yer head, what then...
Who's it calling.
Enjoy! It might be a while before you next eat.
 

Bobby Mhor

Guru
Location
Behind You
Well it t'weren't too bad, I'll give you that
Owdo
Mix & match until you get one you like.
One was right for first half and wind changed after 50% of ride into my face but a welcome one TBF
B to CB.jpg

Ballachulish to Connell Bridge via NCN 78
Mrs M's treat..
she did visit a garden centre and wallet took a small hit :laugh:
Soul destroying pulling it apart.
And she showed you how it should be done.
Hope that's not down those stairs. You're supposed to walk down them. Suppose you go too high and hit yer head, what then...
Who's it calling.
Enjoy! It might be a while before you next eat.
I just broke it down and she helped apply mucho tape to to it and deliver it to the POffice...
 
Top Bottom