sram

looking for the above. Double tap both left and right shifters. Not bothered if it’s apex,rival,force. On a budget so if you can help... thanks

I don't know if this belongs in this forum but I believe this kind of setup has been around MTB for few years now. I am looking into buying a gravel bike and I want to put a 1x11 groupset on it. I need to know if there are any compatibility issues. SRAM Rival 1 comes to mind. I am thinking of...

Hi All, My bike came with an SRAM Rival 1 (long cage) rear derailleur. I'll be leaving to travel Asia in the next few months and I want to take a spare derailleur. I'm pretty good with Shimano but I'm now aware of the finicky side of SRAM so my question is this: Can I use another cheaper SRAM...

Will the wax pre-put on new SRAM chains work as a reliable wet lube?

Brand new/unused with lockring. Not now needed. Can't see same anywhere for anywhere remotely close...

***PRICES REDUCED*** Loads of pics here: https://goo.gl/photos/JSsoTRa7AQD1y3cK8 Prices include postage to standard UK locations and PayPal fees where applicable. Enquiries via PM please. Lezyne Pressure Drive HP, black - incl. mounting bracket Good condition, nicely made and works very...

Would appreciate any advice or guidance... I want to replace the rear sprocket but don't wish to pay more than £10 incl P&P. I've searched but only found SRAM sprockets with less than 20T a reasonable cost (in UK) or 20T sprockets at £25+ from Germany. Two questions: Anyone know of SRAM IHG...

Just bought a Voodoo Bizango,having borrowed a specialized hardrock for a few weeks. hardrock gearing seemed easier up hills, not fully tested new bike yet.Question is what would be the biggest cassette i could fit ,currently 11-42, my little old legs need something bigger , googled sunrace...

Very good condition Sram Force brakeset. I believe brake pull/actuation hasn't changed with Sram meaning suitable for 10 or 11sp. This set are in vgc and aren't for sale anywhere else. Without pads but I'll chuck in some brand new Clarks road Elite triple compound pads for an extra fiver...

Sram S-Series PF/BB30 Carbon crankset 172.mm 50/34 Very light use (as you can see by there still being paint on the teeth) and only the lightest signs of use under close inspection £63.95 posted

I bought this for an edge200 not sure if all garmin mount the same. The torx screw on bottom is very slightly chewed up but will tighten up no problem. No other marks. It was fitted to a new bike then garmin packed up and a bought a tomtom watch so hardly used just left on bike They seem to...

Selling a 10-speed road bike groupset. Came off a Pinnacle Dolomite road bike and hasn't seen much use. Details below: SRAM Apex Doubletap shifter/brake levers SRAM Apex short cage rear mech SRAM Apex band-on front mech Tektro R539 brakes FSA Gossamer 50/34 175mm crankset with MegaEXO bottom...

Hi all Anyone have any idea how to tighten the large hex bolt shown in the picture below? It just spins without tightening (the other shifter is fine). There's an old thread on another forum (https://www.bikeradar.com/forums/viewtopic.php?t=12801871) which suggests that tightening this bolt...

My new batteries have been on charge now for 4 hours still no green light, is that right????

Any one on here fitted SRAM RED eTAP onto a 2014 Bianchi Intenso? just want to make sure there are no problems before pressing the go button

I need a sram rear mech for use with10 speed 11-32 cassette on my fast hybrid. Reliable, good quality v cost, anything on a deal you know about? Don't really want to go above £50. TIA.

I have a boardman comp hybrid about 4years old and the front/left shifter has give up. It's the one for the front mech (double) Can anyone suggest a cheap replacement.

Has anyone got one knocking about ? The cam that adjust the reach has fell to bits on mine and now the lever gets stuck on the brake lever when shifting to a larger cog .

The reach adjustment cam on my sram apex shifters has just fell apart so now the shift paddle gets stuck behind the brake lever when i shift . Is it a replaceable item or is it new shifter time ?

Stripping a groupset off a bike I couldn't sell. Sram rival shifters, front and rear mech, SRAM PG-1050 11-28 cassette, chain, avid shory 6 canti brakes, 170mm FSA Energy Cross cranks 46/36 plus 50/34 stronglight ct2 rings. Pics here...

Gone all Shimano so ,full groupset for sale, 3 years old , about 3000 summer only miles, rear shifter has a crack in the inner plastic hood due to falling against a wall, that happened with 200 miles on it shop glued it and has been fine ever since, compact 172.5 cranks, front and rear mechs...

Sram force carbon crankset 172.5mm arms 42t narrow wide xsync chainring 38t narrow wide xsync chainring (brand new) Fits gxp bottom bracket Done about 100miles max and are in excellent condition £125.00 plus £5 postage and packing Paypal gift please

For sale planet x pro carbon large sram force group set upgraded campegnolo wheel set mint condition £600 tx or tel 07340474101 Doncaster area

this is my son's rear hub from his Whyte mountain bike. The bit sitting on top of the cassette is loose and this doesn't seem right and the wheel won't sit corecorre in the frame. Is there something missing, or should this part be attached to the axle. Any advice would be appreciated.

Available again due to two non-paying ebay bidders. Lots of pics here: https://goo.gl/photos/JSsoTRa7AQD1y3cK8 2016 Boardman CX Team frameset, 55.5cm (size L) - incl. bars, stem, saddle, seatpost, heasdset and other bits... Decent condition other than a bit of cable rub, a chip to the...

Selling for a pal who seems to have acquired replacement cassettes to see him through the next 75000miles Off a new bike but never turned a wheel RRP 53 Available 41 £25 posted

I have gone Di2 so this is off my Summer bike. All you need to go SRAM (just add any 10 speed chainset and brakes of your choice) Sram Rival 10 speed shifters - Sram Rival rear mech - Shimano 105 front mech. The mechs are both lightly used with no major scratches (the 105 is said to be better...

As per the title. Has anyone managed to fit a shift lever and mechanism to a 1x rear HRD brake (and front shift) lever unit? I know people remove the shift lever and internals from Rival and Force 22 HRD front brifters to run as 1x, and that replacement shift levers and internals are available...

Anyone got any views on relative quality? I know that they are entirely compatible, at least up to 9 speed, which is all that bothers me. I have used SRAM 7 speed cassettes on a dual drive system (3x7) and they seemed somewhat shinier than Shimano's offerings at that price point. Not the most...

Does anyone know where I can get a Sram Rival shifter repaired? I believe Sram sell the parts but I don't want to try surgery myself unless there is no other option. The bike is still rideable, but it is rather annoying. I suspect one of the teeth has broken on the splined ratchet bit as it is...