Fredo76
Über Member
- Location
- Española, NM
Converted Bella to upright bars.
What Have You Fettled Today?
- Thread starter threebikesmcginty
- Start date
Page may contain affiliate links. Please see terms for details.
Converted Bella to upright bars.
VinSumRox
Senior Member
- Location
- Scottish Borders
Changed both gear cables and some of the outers on OHs bike, all very smooth now.
cyberknight
As long as I breathe, I attack.
- Location
- Land of confusion
Adjusting the brakes on the commuter only to find the rear barrel adjuster has seized so the plastic knob is spinning but nothing is moving so i have to take it off the bike and use pliers to get the metal barrel out of the brake caliper , this pretty much destroys the plastic bit .
A quick search on google yields no results for a replacement bit and the lower spec single piston ones i have by the same manufacturer are a different size !
I manage to reassemble the adjuster so it works although its not pretty and i have made a bid on a pair of the same model on ebay and i got a set for £16 .
When the replacement comes i will recable as well as it looks like the metal cable end had also rusted into the barrel as well so with the mangled plastic bit the cable end doesn’t sit properly in the barrel now .
It works but it aint pretty
A quick search on google yields no results for a replacement bit and the lower spec single piston ones i have by the same manufacturer are a different size !
I manage to reassemble the adjuster so it works although its not pretty and i have made a bid on a pair of the same model on ebay and i got a set for £16 .
When the replacement comes i will recable as well as it looks like the metal cable end had also rusted into the barrel as well so with the mangled plastic bit the cable end doesn’t sit properly in the barrel now .
It works but it aint pretty
fossyant
Ride It Like You Stole It!
- Location
- South Manchester
Aytoglym Super Resin on the Colnago CX bike. Hopefully ready for tomorrow. Might treat it to the 'extra gloss' followed by the 'ceramic' treatment - need every help currently to go a little faster than a crawl. At least any mud won't stick and slow me down. The Garmin is on charge.
DCLane
Found in the Yorkshire hills ...
- Location
- Dewsbury, West Yorkshire
I've not done much this week as I'm waiting on a tool to cut the carbon fibre TT bars on the NeilPryde Bayamo TT bike before I fit new shifters, etc. and looking after SWMBO for the past 10 days has taken it out on me.
However, the Giant FCR looks to be hanging around for a while, so I've stuck a bottle cage on it until I source a replacement pair of tyres and a chain.
However, the Giant FCR looks to be hanging around for a while, so I've stuck a bottle cage on it until I source a replacement pair of tyres and a chain.
Gwylan
Veteran
- Location
- All at sea⛵
I have fettled my iPod. A very early version
Eventually the battery died.
Good old internet found a reliable spare in Germany.
Again a little set of instructions on the www. Eventually prised the case open. Took more force than I imagined, so was being careful.
It is now back together, worked for brief test and resting as the battery charges
Found all sorts of music.
Need to get what's on the iPod onto my Chrome book. Then tidy it up and merge with all the stuff on my phone.
Consolidate the library.
Then have the phone for everyday and the iPod for the camper.
Just have to sort the synch so everything is everywhere
Eventually the battery died.
Good old internet found a reliable spare in Germany.
Again a little set of instructions on the www. Eventually prised the case open. Took more force than I imagined, so was being careful.
It is now back together, worked for brief test and resting as the battery charges
Found all sorts of music.
Need to get what's on the iPod onto my Chrome book. Then tidy it up and merge with all the stuff on my phone.
Consolidate the library.
Then have the phone for everyday and the iPod for the camper.
Just have to sort the synch so everything is everywhere
sevenfourate
Devotee of OCD
- Location
- Lowestoft, Suffolk
Gearing change. Along with new chain, Titanium Wheel Nuts and a new Front Brake lever.
A few swear words - trying to align the pin on the chain link I split; when trying to re-align after shortening - but other than that; all pretty painless 😁
**5 teeth less on the front (30t originally and now 25t) - and I can barely tell the difference 🤷♂️
A few swear words - trying to align the pin on the chain link I split; when trying to re-align after shortening - but other than that; all pretty painless 😁
**5 teeth less on the front (30t originally and now 25t) - and I can barely tell the difference 🤷♂️
DCLane
Found in the Yorkshire hills ...
- Location
- Dewsbury, West Yorkshire
Yesterday evening I pulled out the NeilPryde Nazaré ready for a test today. Bars adjusted upwards a bit as I still need that, then tried some Fastop carbon wheels after putting fresh sealant in and inflating. Cue issues starting: the front tyre had split over the winter, so that got a new GP5000 tyre, and the mess cleaned up. The rear had a bit of movement and this evening I've taken out the freehub, cleaned, then greased everything before putting it back together - it's all working nicely. This morning I used a pair of 'spare' carbon wheels instead.
Also, the Parcours Grimpeur carbon rear wheel I picked up last autumn had a used GP5000 tyre and cassette added since I've not used that yet.
This afternoon I did the same bar adjustment on the Thompson Capella and got that all working again after the winter. I also cleaned the grubby celeste bar tape. Either this bike needs more use this year or it'll be moved on.
Following that the Ridley Fenix had a pair of DT Swiss R460 wheels from the Vitus 797 purchase in January which received new 28mm Goodyear Eagle Sport tyres that I've had sat around for a while: I'll give those a test.
The Giant FCR also got new tyres after I noticed the front de-laminating yesterday. More fun; I tried a pair of Arisun Rapide's which I had but realised they were 32mm rather than 28mm and wouldn't fit: they normally live on my Raleigh Pioneer. So, the front got a used 25mm Pirelli P Zero and the rear a used 25mm Conti 4 Seasons as a 28mm Pirelli Cinturato Velo was too tall.
Finally, the Raleigh Pioneer hybrid was pulled out from under the outdoor storage cover, cleaned and re-greased, then put back. I'm not sure how much use it'll get until we hit next winter but at least it's all working.
Whilst that lot were out I swept the floor of the parts shed as it's gained quite a bit of dirt over the winter.
Also, the Parcours Grimpeur carbon rear wheel I picked up last autumn had a used GP5000 tyre and cassette added since I've not used that yet.
This afternoon I did the same bar adjustment on the Thompson Capella and got that all working again after the winter. I also cleaned the grubby celeste bar tape. Either this bike needs more use this year or it'll be moved on.
Following that the Ridley Fenix had a pair of DT Swiss R460 wheels from the Vitus 797 purchase in January which received new 28mm Goodyear Eagle Sport tyres that I've had sat around for a while: I'll give those a test.
The Giant FCR also got new tyres after I noticed the front de-laminating yesterday. More fun; I tried a pair of Arisun Rapide's which I had but realised they were 32mm rather than 28mm and wouldn't fit: they normally live on my Raleigh Pioneer. So, the front got a used 25mm Pirelli P Zero and the rear a used 25mm Conti 4 Seasons as a 28mm Pirelli Cinturato Velo was too tall.
Finally, the Raleigh Pioneer hybrid was pulled out from under the outdoor storage cover, cleaned and re-greased, then put back. I'm not sure how much use it'll get until we hit next winter but at least it's all working.
Whilst that lot were out I swept the floor of the parts shed as it's gained quite a bit of dirt over the winter.
Ming the Merciless
There is no mercy
- Location
- Inside my skull
New brake blocks on Brommie. Gone for Swiss stop green.
