What Have You Fettled Today?

Page may contain affiliate links. Please see terms for details.
Why three lights Richard?
It's actually 4 x rear/4 x front

A bit of redundancy, if the charge drops, so I have back-up

2 x https://www.halfords.com/cycling/bi.../bikehut-50-lumen-rear-bike-light-684507.html (wifes Boardman also has two of these, but BIGGER reflectors)
1 x https://www.halfords.com/cycling/bi.../bikehut-25-lumen-rear-bike-light-684440.html
1 x Smart? ( the uppermost)

517630



2 x https://www.halfords.com/cycling/bi...argeable-front-bike-light---black-208302.html (as ''repeaters')

517631



I was given this (courtesy of a friend/work collegue) & need to return it to Hope, to be repaired, which will replace the 'Smart white'. or the (Planet X) Magic-Shine
(R8)

517629



And this, which I think(?) was on the towpath (access road to Birkwood Lock) on the Aire & Calder Navigation Canal, when my regular route was fully closed for water-main repairs
(circa 23:00)

517632
 
Last edited:

JhnBssll

Guru
Location
Suffolk
Received the Ultegra stages crank arm so fitted it this evening, updated it to the latest firmware version and calibrated it ready for a test ride tomorrow :okay:

517673


Whilst I was there I decided to trim the steerer down. I'd left it 10mm long when I built it in case it needed tweaking. With several hundred super comfy miles done I figured it was time to neaten the front end up 😊

517674


517675


517676


517677


I might shift one of the 5mm spacers above the stem at some point but will leave it as is for now :okay: Looking forward to riding it tomorrow :okay:
 

Ming the Merciless

There is no mercy
Location
Inside my skull
Received the Ultegra stages crank arm so fitted it this evening, updated it to the latest firmware version and calibrated it ready for a test ride tomorrow :okay:

View attachment 517673

Whilst I was there I decided to trim the steerer down. I'd left it 10mm long when I built it in case it needed tweaking. With several hundred super comfy miles done I figured it was time to neaten the front end up 😊

View attachment 517674

View attachment 517675

View attachment 517676

View attachment 517677

I might shift one of the 5mm spacers above the stem at some point but will leave it as is for now :okay: Looking forward to riding it tomorrow :okay:

Is that a plumbers pipe cutter?
 

carlosfandangus

Über Member
Looks like a jig for a hacksaw, used a pipe slice on the alloy steerer, wish I had used a jig on the carbon, I had to file mine flat
 

Gunk

Guru
Location
Oxford
A lot today, finished off the refurbishment of the Mavic wheels for my Peugeot project,

517860


517861


517862


Then tackled the stem, bars and old Weinmann levers

517863


517864


Finally I stripped and rebuilt the shifters and cleaned up the seat stem. So a busy day.
 

pawl

Legendary Member
It's actually 4 x rear/4 x front

A bit of redundancy, if the charge drops, so I have back-up

2 x https://www.halfords.com/cycling/bi.../bikehut-50-lumen-rear-bike-light-684507.html (wifes Boardman also has two of these, but BIGGER reflectors)
1 x https://www.halfords.com/cycling/bi.../bikehut-25-lumen-rear-bike-light-684440.html
1 x Smart? ( the uppermost)

View attachment 517630


2 x https://www.halfords.com/cycling/bi...argeable-front-bike-light---black-208302.html (as ''repeaters')

View attachment 517631


I was given this (courtesy of a friend/work collegue) & need to return it to Hope, to be repaired, which will replace the 'Smart white'. or the (Planet X) Magic-Shine
(R8)

View attachment 517629


And this, which I think(?) was on the towpath (access road to Birkwood Lock) on the Aire & Calder Navigation Canal, when my regular route was fully closed for water-main repairs
(circa 23:00)

View attachment 517632

I’ll bet you used to ride a motor scooter back in your mod days😀😀😀😀
 
Top Bottom