Team BKool CycleChat

Page may contain affiliate links. Please see terms for details.

keithaitch

Veteran
Location
barcelona
Alsorts of problems including negative dust. I actually checked to see if the brake was on, I had real problems putting out over 100w. It was OK standing but as soon as I sat am anchor went on and I couldn't stay stood up the whole way.
 

BILL S

Guru
Location
London
Alsorts of problems including negative dust. I actually checked to see if the brake was on, I had real problems putting out over 100w. It was OK standing but as soon as I sat am anchor went on and I couldn't stay stood up the whole way.
Well your ghost was far too fast for me. AAAC tried to tow me to the front ghosts but I couldn't keep on the power as I was knackered from lack of exercise.
 

beeegy

New Member
Hi guys.
I'm interested in why the green light on the trainer flashes. It begins to flash automatically while it is running, thus losing the trainer's resistance. You can view the video in the attached link. Have you already had such an example? Everything is properly connected, so far everything was ok.


View: https://vimeo.com/330187720

Thanks for helping.

Regards,
Marko
 

shimceltic

Veteran
Hi guys.
I'm interested in why the green light on the trainer flashes. It begins to flash automatically while it is running, thus losing the trainer's resistance. You can view the video in the attached link. Have you already had such an example? Everything is properly connected, so far everything was ok.


View: https://vimeo.com/330187720

Thanks for helping.

Regards,
Marko

Not peddling fast enough .......
Is it losing signal How close to the unit is your ant?
 

Brusgaard

Über Guru
Location
Skive, Denmark
Hi guys.
I'm interested in why the green light on the trainer flashes. It begins to flash automatically while it is running, thus losing the trainer's resistance. You can view the video in the attached link. Have you already had such an example? Everything is properly connected, so far everything was ok.

If possible, try with a known good power supply.
 

beeegy

New Member
I'm cycling fast enough, this can not be a reason... I also tested with another power adapter from previous model Bkool Pro, and the green light also flashes.
The use of the trainer is almost impossible because the power (watts) is jumping up and down. Below I am adding a video of what it looks like in the Bkool simulator when the green light flashes. I have the feeling that the light starts flashing when I start cycling very hard.
I dont know what to do...Anybody seen that problem before?


View: https://vimeo.com/330512091
 

Bored Man

Upstanding Member
Location
Arrochar
Surely the light is a power indicator and therefore your trainer must have an internal fault. If the power to the trainer is faulty and intermittent, the trainer will drop in and out of resistance.

Send it back and/or get it tested.
 

theboxers

TheBoxers on Cycle Sim sw
I'm cycling fast enough, this can not be a reason... I also tested with another power adapter from previous model Bkool Pro, and the green light also flashes.
The use of the trainer is almost impossible because the power (watts) is jumping up and down. Below I am adding a video of what it looks like in the Bkool simulator when the green light flashes. I have the feeling that the light starts flashing when I start cycling very hard.
I dont know what to do...Anybody seen that problem before?


View: https://vimeo.com/330512091

Are you using a cadence sensor? Because you appear to be losing both power and cadence. I know the pro and pro2 both send cadence but it has been known to be variable in its accuracy. If you have a cadence sensor put it on the bike and see what happens.

But I would agree with Jim get it tested or send it back for an exchange or refund :sad:. I've been down this road with a kickr having problems with the locating key. Exchanged without issue and currently the new one appear to have no problems.
 

AAAC 76C

Large Member
Location
LIVING THE DREAM
I'm cycling fast enough, this can not be a reason... I also tested with another power adapter from previous model Bkool Pro, and the green light also flashes.
The use of the trainer is almost impossible because the power (watts) is jumping up and down. Below I am adding a video of what it looks like in the Bkool simulator when the green light flashes. I have the feeling that the light starts flashing when I start cycling very hard.
I dont know what to do...Anybody seen that problem before?


View: https://vimeo.com/330512091


I can't see the green light when I'm cycling.
I will have a look to see if I can get a flash.

If I do I will take a picture.
 

AAAC 76C

Large Member
Location
LIVING THE DREAM
I can't see the green light when I'm cycling.
I will have a look to see if I can get a flash.

If I do I will take a picture.

I got one

upload_2019-4-15_19-20-27.jpeg
 
Top Bottom