Brusgaard
Über Guru
- Location
- Skive, Denmark
Schedule the session, add me and AAAC as ghosts, if you want a pure CycleChat race. Otherwise, you have around 25 Danish ghosts you can add too. :-)
Team BKool CycleChat
- Thread starter Peteaud
- Start date
Page may contain affiliate links. Please see terms for details.
Schedule the session, add me and AAAC as ghosts, if you want a pure CycleChat race. Otherwise, you have around 25 Danish ghosts you can add too. :-)
shimceltic
Veteran
Any of them slow enough for me to draft!
Brusgaard
Über Guru
- Location
- Skive, Denmark
AAAC 76C
Large Member
- Location
- LIVING THE DREAM
Never umderestimate the power of the Danish league! About 108 Bkoolers were on the startline tonight.
Yes, I think I may have to give it another go as well. Maybe I can shave off an extra 10-20 seconds, if I don’t fek up the start.
Logged into Bkool 5 minutes before race start, but it wouldn’t connect the trainer. Off the bike checking power cable, back on the bike and switching the trainer on/off a couple of times, no luck. Quit the simulator, noticed the clock said 7:59, and logged in again and it worked. I then found the race and was pretty confident it had already started, so I just started pedalling like crazy waiting for the question to start from the beginning. But alas, I jumped into the warmup with less than 10 seconds to start.So there I just sat waiting for the backwheel to stop spinning, so that I could take off....
Bad luck mate.
I just so hate it when you mess up the start when you know its the start but that must have sucked!
Alfie Thomlinson
New Member
Hello, Hope you all had. a good Christmas! This is a question for the Bkool Gurus who may be able to help with an issue I'm having with my new Bkool Pro 2 and resistance. Recently received the Bkool trainer, followed the manual, connected the trainer as instructed to do so. The major issue I am having with the trainer is that it is not creating any resistance at all! This is on both the Bkool simulator and Zwift. I have searched the web for an answer, but all of the advice I found I had already done. The trainer is correctly connected in 'controllable' setting, as it is supposed to be. The Green light on the trainer works, and when I turn on the trainer, it makes the little groan its supposed to do as well. I amend to this indoor cycling lark and so thought it may just have been my lack of knowledge and missed something vital, but again I don't know. Any help would be appreciated as always, Many thanks!!
Alfie Thomlinson
New Member
(I am new to this indoor cycling lark) it should read, apologies!
Randyberlin
Guru
- Location
- Sitka, Alaska
Most of us have used a USB extension cable to move the Ant+ close to the back wheel
berty bassett
Legendary Member
- Location
- I'boro
Randy makes a good point - i had forgot about that ! try putting laptop right close to the unit to see if it picks up the ant thing - if you feel resistance then you will need a usb extension lead
Tarrington
Member
Hi, can I join the chain gang please? Thanks, Dan
Randyberlin
Guru
- Location
- Sitka, Alaska
Who is doing the Saturday rerun?
shimceltic
Veteran
I've just done the race, can someone verify it so randy has a ghost t keep him company
Randyberlin
Guru
- Location
- Sitka, Alaska
I challenged you from the ranking in BKOOL. I’ll start at 5 with 10 minute warm up if there’s any other late in the year stragglers
shimceltic
Veteran
Has the time been accepted then? I can't see it. I had my new powerful fan and cleats on today rather than trainers, must have took a few seconds off my Normal time.
Randyberlin
Guru
- Location
- Sitka, Alaska
