Nooo, headset fallen down steerer tube

[gb155]

Ok, how do I recover this ?

Was putting new bars on the "Chi-Done" and the headset has fallen down steerer tube

 

[dan_bo]

Eh? Headset? Down the steerer? Pic?

 

[gb155]

Erm the bit in the tube that the nut screws into

 

[Mark_Robson]

Just turn the frame upside down and give it a shake.

 

[dan_bo]

Ah. Give it a bit of a tonk from the other side (I improvise a drift with a scabby old screwdriver-fat end incedent onto the suspect bung) and tap it back where I want it. Peas.

 

[gb155]

Just turn the frame upside down and give it a shake.

I did

It's stuck solid

 

[gb155]

Ah. Give it a bit of a tonk from the other side (I improvise a drift with a scabby old screwdriver-fat end incedent onto the suspect bung) and tap it back where I want it. Peas.

It's at the very bottle of the tube tho

 

[dan_bo]

S'ok. If you use a fat enough 'drift' it'll push it nice and flatly.

 

[gb155]

S'ok. If you use a fat enough 'drift' it'll push it nice and flatly.

Push up from where tho mate ?

 

[dan_bo]

From underneath. Between the tines.

 

[dan_bo]

Whoa. Hold on- is It a carbon steerer? If so, chill and get the shop to do it. If it's alloy, go ahead.

 

[gb155]

From underneath. Between the tines.

I know im a fool, but there isnt anywhere underneath it ?

Heres a pic

 

[gb155]

[QUOTE 1398784"]
Look at the other end, up from between the fork. What can you see?
[/quote]

The bottom of the forks, theres no hole ?

 

[dan_bo]

Get thee to the shop they'll pop a fresh one in for about.....not much.

 

[dan_bo]

Get thee to the shop they'll pop a fresh one in for about.....not much.