Ajax Bay
Guru
- Location
- East Devon
Review Schwalbe-Durano-2015
No significant tread on these road tyres so mounting direction is irrelevant.
No significant tread on these road tyres so mounting direction is irrelevant.
I can often not tell whether rr is joking or not, but for the avoidance of doubt, the contribution above has no validity.There is a difference in performance, dependent on which way round you mount the tyre. It’s partly due to a fluid dynamic effect, which is exacerbated if they tyre is moving through water, which isn’t great, but it is there. If you put the tyre on the wrong way round, you will lose Watts, unnecessarily, and that is a DISASTER. More pertinent to the majority of people, is that the tyre will behave differently under braking. They work better, with the tyre mounted the correct way round.
The link you offered makes no mention of the importance or not of the direction that the tyre is fitted.It’s explained here ( regarding the dependency of direction / pattern on aero)
I have to observe that Mr Cotty's advice/opinion is flawed with logical anomalies.And here regarding grip / braking performance.
YawwwnFirst of all, welcome back from your sabbatical, @Racing roadkill
The link you offered makes no mention of the importance or not of the direction that the tyre is fitted.
I have to observe that Mr Cotty's advice/opinion is flawed with logical anomalies.
Recalling that tread on cycle tyres offers no advantage regarding water dispersal:
1) He suggests that the tread (if orientated the 'correct' way') will afford "better water evacuation in the curves" (what does that mean? round bends?)
2) Since the tyres are both going round the same way (assumes bike is going forward) if there was any merit in this 'water evacuation', why would you want the one tyre to go on one way and the other to go on the other way? Agree that the critical function of the rear is to effect drive and that of the front to allow braking, but these sipes (as in the diagrams) will have no relevant beneficial effect.
MR Cotty, the 'Mavic Community Manager (lucky guy) might wish to review this Schwalbe advice: https://www.schwalbe.com/gb/profil.html
"In the case of a road tyre the rolling direction is mainly important for aesthetic considerations. Tires(sic) marked with arrows simply look more dynamic." (my emboldening)
Agree that the critical function of the rear is to effect drive and that of the front to allow braking,
I wouldn't get caught up too much about all this drivel with tyre direction. Honestly it's boring and while i'm all for putting tyres on the 'arrow' way, there really are more important things in the world.
. . . Like did you stop & think whether you put your innertubes in the right way round?
Which is why some mountain bikers run their tyres 'opposed'.
No idea if doing so makes any difference, but I suppose it could in proper mud.