i'm running a long cage sram force rear mech and kmc 11 speed chainShimano XT M8000 11-34
You'd need to be sure of compatibility, they say it's to run with HG11 speed chains.
mech is fine - just can't find the 11-34 m8000The KMC chain will do it OK I suspect, but you'll need to check the capacity of your mech. (although I suspect you already will have done if you already know the combination you want)
got sram red upfront 130bcd.............could look for a 46/30 set-up of even a 48/32.....but don't know if thats a viable option on the sram redMy mistake, it's 11-42.
It's looking like 11-32 in 11 speed, all the bigger ones are for 1* MTB setups.
How about a smaller chainring?
Try the Spa Cycles website. They are specialists in touring set-ups.got sram red upfront 130bcd.............could look for a 46/30 set-up of even a 48/32.....but don't know if thats a viable option on the sram red
not got anything lower than a 35 inner for 130 bcd...............Try the Spa Cycles website. They are specialists in touring set-ups.
http://www.spacycles.co.uk/m2b0s0p0/Parts-and-Accessories
Ive seen that one.....but sram say its for 1x drivetrains onlyNot seen an 11-34 cassette in 11 speed, but SRAM do an 11-36 for cyclocross. http://www.tredz.co.uk/.SRAM-PG1130-11-Speed-Cassette_81753.htm
Ive seen that one.....but sram say its for 1x drivetrains only
It might be down to wrap capability of the rear mechPossibly, but is there a reason why it wouldn't work? I've seen a few people using them with double drivetrains, you'll likely need to adjust the b-screw, but it should work I would have thought.