pedals

Looking for the cheapest set of power meter pedals i can get my hands on so that i can hook the wife's spin bike up to zwift. Vector 3 preferred as they are SPD-SL but any others considered.

Please does anyone know if I can get traditional cleats for classic flat pedals (Campag/SR type) to fit a modern three-bolt shoe like the one in the picture ? Thanks chaps.

Hello all, I need a new set of pedals for the GTECH, ideally same as fitted but I can't find any!. (Wellgo pedals k79 c210). Are all pedals the same thread? Don't want to buy a set and have bother fitting them.. Had a look and can't see any way to take them to bits..

After some advice, Currently got some speedplay pedals that came with a 2nd hand bike. Previous bike I had spd sl pedals. Are speedplay an upgrade on the spd pedals? Only because I dont feel as connected to the bike with speedplay, so thinking of selling them.and buy the spd sl. If so which...

Hi As I bought this bike second hand, I don't know the kind of pedals that I have. I would like to get proper cycle shoes to assist with longer rides. What entry level cycle shoes would you recommend to go with these pedals? Any advice appreciated. At present, I am doing a couple of 25...

Just wondered if anyone has fitted quick release removable pedals in order to make their bike less nickable ?

I need to get some flat pedals for my bike, they currently have the pedals with the foot cage (I've taken the cage off) and they seem not wide enought plus I can only use one side of the pedals. I want to replace them with some flat road bike pedals, which don't cost a lot of money. I've been...

I have Shimano M324 pedals on my Giant Roam 0 hybrid. I use the flat side not cleats. I know this sounds stupid but I've not been able to master getting the right side. For some reason whenever I set off at traffic lights. My left foot always finds the cleat side and sometimes it can be...

Shimano PD R8000 carbon pedals, good condition, only covered a couple of hundred miles, new set of SPD SL cleats included, £45 posted.

Assuming all goes according to plan my new "gravel" (fapping hate the term already) bike should arrive tomorrow. My road bike has Shimano PD-A600s fitted (two-bolt MTB cleat, single-sided with an integral platform) like these: I bought them because of their flat design in the hope they'd...

Just bought a Brompton. Are folding pedals necessary ?

Does anyone make a plate that clips into a MTB type Shimano SPD pedal that allows standard trainers to be worn ? Would like to go for short rides with the girls (10 & 8) without wearing my cycle shoes. I know there are dual type pedals available but just looking for a simple conversion plate...

So far on my roadbikes i have used Shimano one sided pedals. Very happy until recently but now I have developed an inexplicable hip strain. It was suggested that Speedplay because of large float might be beneficial. I welcome all comments: 1) is the conversion kit to allow fitting of such...

I’m selling a brand new pair of black Shimano PD-R540 SPD-SL road bike pedals, cleats are not included. These are brand new in sealed bags. The first image is taken from the internet, the other photo is of the actual pedals. Asking £18 posted first class. Payment via PayPal gift please.

Hi Folks I”m in the market for some road bike clip less pedals has anyone got recommendations please? I”m after value for money tbh but any suggestions would be welcomed. thanks in advance Eldridge 😎

Hi Quick question about pedals. I've recently started training on a wattbike. As most indoor bikes, this one has flat pedals with toe clips on one side, and on the other side an attachment for some sort of cleats. So far I've used it with my gym shoes. I'm not familiar with cleats and bike...

I have got a Carrera Vulcan Hardtail MTB, and wondering how to take the pedals off, as i want to get a different colour. Also how do you take off the handle bar grips, to swap with different colour? I have watched Matt Jones, and Sam Pilgrim videos, and have inspired myself to doing stuff like that.

Are the older type of look pedals compatible with shimano road pedals? Another cyclist today insisted they are and cleats/pedals from either are interchangable? Reason i ask is i have a few sets of older style look pedals i was going to bin but if they can be used by some one that uses shimano...

I have a very nice pair of Nortwave Goretex spd boots. Any suggestions as to how I can adapt these to use on flat pedals? I can remove the cleats but what could I fill the gap with to provide some grip. I have lost my confidence using spd pedals especially off road.

I have a question? MTB flat pedal Recommendations? But more importantly; What shoes are best for flat pedal riding? I use clipless pedals on all bikes, but need to use flat pedals on my 29’er. Should I look for dedicated MTB Flat pedal shoes or boots? or maybe find some suitable trail walking...

Any tips on removing very stuck on pedals ? Think the alloy and steel have welded together!

I have just bought my 3rd pair of Five Tens. Excellent shoe with brilliant grip and they are ok enough looking to wear when not on the bike. What are you preferred shoes/trainers for cycling with flat pedals?

10 speed Shimano Tiagra 4700 groupset minus brakes and b/b. As new , taken off a new bike , unused . 170 mm cranks 50/34 rings. 11-32 cassette . £175 Ono. Shimano 105 pedals spd , done about 30 miles , £30 . Can email pics if interested.

I got a pair of inexpensive, but good DMR V6 pedals. They were a bit stiff due to having bushes not bearings, so I drilled a small hole in the side of the plastic axle. Then I pumped in some oil from a oil bottle until the oil leaked from the top and bottom of the axle. I then filled the holes...

It's my first attempt and I suspect I'm doing this all wrong...been trying and failing to get these off using the 6mm hex key on my multitool. It's not having it at all so I was thinking I'd get a longer hex for more leverage but am I even doing it right? Should I be trying to use a spanner on...

I've just bought a new set of pedals, not the most expensive I have to say, and they seem pretty stiff. Is this a normal state of affairs? If not I'm assuming that taking them apart and repacking with grease would be the way to go. Is there anything I need to know before I pull the spindle...

Right I'm looking at getting some pedals and shoes for my cyclocross bike that I use mainly for rides with the family at the moment but I'm going to be doing some longer rides soon with training starting for lejog. So i want some clip in pedals and then I would like a trainer type of shoe that...

Hi Folks.... I have the O.E wheels off a 2014 Defy 2 for sale. part number SR-2 They were taken off the bike after about 12 months of use. The rear hub was a bit noisy when I removed them, I think its sealed so bear in mind(the front was fine) the logos are Okay-ish the worst is on the front...

Training my now 7 year old daughter to ride a bike has been hard going and she still hasnt clicked. Going to do what I should have done at the beginning and take the pedals off to make it more of a balance bike. However, I wasn't sure how to do it...can anyone advise? Pics here...

https://www.cyclingweekly.com/reviews/pedals/shimano-105-pedals In good+ used (c.750 miles use) condition and spindles/bearings re-greased yesterday. Very highly regarded and reviewed. Price excludes PP fees