front

I've just replaced the siezed forks on my commuter MTB with some Exotic rigid forks which don't have a bridge, so nowhere to attach my front mudguard. I could bodge something up with cable ties, jubilee clips etc but it will take time (that I don't have atm) to make something rigid enough to...

The gory details: Chain gauge tool suggests new chain, but not enough wear for a new cassette. Front mech is a triple with an eight speed cassette. The LBS did not have a 8-speed chain in stock, but said a 9-speed would still work. (It turned out I had a new 8-speed in my 'stock', and I cannot...

New unused Token C30A Flip Flop rear wheel. SOLD. Mavic Open Sport front wheel with Tiagra hub. 700c. Excellent condition. Has had very little use as I changed to a dyno hub wheel soon after purchase. £30 DHB bike bag £25.

I am sure I have mentioned it before on here about people parking in front of my gates and dropped kerb. Tonight someone had left a Van in front blocking access,in the past I have gone knocking on doors etc but today I was peeved that it had happened yet again so I phoned the plod who sent a...

I recently purchased a new Giant Defy Advanced Pro 1 (2017). Its Shimano Ultegra with hydraulic discs. The front shifter is a 'triple', the front chainrings being a compact double. When changing down two clicks the front derailleur shifts to a position where a small third chainring would be...

Decided to the mudguards back on the fixed. Where is the front yoke fixing at the brake bolt supposed to go? The from brake bolt goes into the frame under the top tube at the back so it can't go there. It doesn't look right up against the top tube so it's got to go between the two washers (...

I recently bought a secondhand Raleigh Shopper for the sole purpose of nipping down to the shops. I rigged up a jury-rigged arrangement for carrying stuff on the rear rack but am wondering what basket is meant to attach to the little frame on the front? In the attached photo it's the lower frame...

I just damaged a perfectly good SP Dynohub* on my commute bike so thinking of replacing it with an alternative. Commute bike is fixed so just front brake, currently a V-brake. However it occurred to me I could get a disk dynohub (and new fork) and go disk brake on the front. Alternatively...

Shifters have hoods beginning to smooth a little but no rips. Levers have no scratches etc and are very good condition. Perfect working order. ****Sold**** 34.9 band on front mech. Very good condition. ****SOLD*** Chain fitted and ridden 100 yards. Sold with sealed KMC quick link. 106 rivets...

Don't we have enough of these silly threads? How about one thread, and the theme of the photos runs for a month.

Just pay delivery Compatible with 8.4v Magicshine connectors Part of the outer ring (halo) as indicated on the picture doesn't work, the rest of it is fully functional

Not sure if this is really a Folly, but far too grand to be "just" the [former] entrance to a farm: At Redlynch, 'twixt Bruton and Wincanton (Somerset) But this IS a Folly: King Alfred’s Tower is a 160ft (49m) high folly, designed by Henry Flitcroft for Henry Hoare II in 1772. It is...

Surely this must revive some happy memories? I stayed in many in the 1980s, most of which no longer exist. If I had my time again I would photograph my bike in front of every one of them, but this may be all I have: Pictures without a bike in shot are perfectly admissible of course. I'm sure...

I'm looking for possible causes to my Genesis Equilibrium front wheel shuddering whilst braking. It's definitely a new thing but I was on a steep downhill section and I was trying to keep the speed under strict control as there was quite a few hidden patches of thick ice, so I was probably...

I have now stripped off my defective front mech (https://www.cyclechat.net/threads/what-have-you-fettled-today.87079/page-407) It seems the receiver side of the clamp where the bolt screws into is stripped out, with all the threads being rotten and rusty. Having removed the mech it all appears...

Going to get my LBS to build me a new front wheel either later today or mid week (depending on how long today's last minute xmas shopping takes). When I had a chat with the guy last week he recommended either going for a Shimano 105 or a Hope hub. From what I recall the Hope hub would add...

Not sure if this thread has already been covered apologies if it has! Some impressive Halls out and about quite a few local to me in Doncaster like Cusworth Hall which I passed through this morning. Put your pics up of any hall you pass on your ride out cheers Cusworth hall by Thorn Sherpa...

Has anyone tried this? Is it unsafe, especially without running rear racks?

Ive got the rear and im after the front ( greyish colour) on the off chance anyone has one to sell.

To paraphrase Monty Python...........

Recommendations or advice welcomed. As,too,experience. The retailer CHWhite has told me the Dahon Cargo system has not been imported to the UK because it appears 'not good enough'(un-engineered?). I was looking at this piece of equipment to carry stuff around abroad with a Carradice Camper...

I have 3 Garmin out front mounts for sale they are brand new and boxed and are suitable for most Garmin's except the larger Edge 1000 (which I unfortunately have!). Each come with a rubber shim for narrower handlebars and an Allen key for fitting. Price £12 each via PayPal gift. Postage £2.90...

On my Kaffenback 2 I tried to fit a LifeLine Narrow Road Mudguard Set from Wiggle. It described itself as "42mm (28-32mm tyres)". Here they are, <£16 and quite adjustable - every leg is independently fixable. Single legs at the front makes it quite easy to fit at the front at least. I have...

Its happened a few times on my road bike when coming up to a junction and starting to track stand. Nearly caught me out as I'm clipped in. Nothing I can do about it but does anyone elses feet touch their front wheel when turning. Also is their any chance of this happening when riding at speed.

Evening all, I'd like a clutter free handlebar and am considering mounting my light on the front fork crown, with a detachable light ( maybe catseye volt 800) would I still achieve the same spread of light on unlit country lanes being lower down on the frame or should I stick with the handlebar...

In good condition please, brake pads not necessarily required

Saturday I plan to swap the SRAM chainset on the best bike for another SRAM one with carbon arms. Will be fitting it to the existing bottom bracket, which is a Hope with the usual Truvativ GPX adapters fitted. To my mind, with correct application of my trusty torque wrench the new chainset...

https://www.rutlandcycling.com/accessories/lights/exposure-flash-front-bike-light_109609 Black - £21.99