cassette

I am running 10 speed Shimano road gears. Finding hill climbing very difficult (old age) At present I have a 11 to 30 cassette, will a change to 11 to 34 make an appreciable difference for ease of hill climbing ? Thanks' for any replies.

Selling for a pal who seems to have acquired replacement cassettes to see him through the next 75000miles Off a new bike but never turned a wheel RRP 53 Available 41 £25 posted

Took the cassette and chain off the new bike to give it a good clean after the factory chain coating had served its purpose from the first 300 miles. I let the chain dry out thoroughly and then lubed it accordingly. Refitted the cassette in exactly the same way as I fitted it the first time...

Current wheels have 11 speed Ultegra cassette. Looking at another bike which is 10 speed with no wheels. What would happen if I put my 11 speed cassette wheels on the 10 speed bike?

Had the bike on the trainer sorting out a bit of chain rub on the front derialleur and noticed the a bit of movement in the rear cassette and it sounded a bit funny . Giant contend 10months old . How does it sound and look do you think it needs sorting in any way ...

Hello, is there a difference between a mountain bike and a road cassette ? I want a lower (hill climbing) gear and can only find M/B cassettes with the higher number of teeth. The present low gear has 36 T. and I would like about 40 T. The bike already has a long cage rear derailleur Yes it is...

This came with a bundle and apparently only been used on a turbo. 11 speed and 11 -25T - No Lock Ring but includes all intermediate 11s spacers Very clean and looks lightly used Sold

As above. Cheers.

Came off a bike I purchased - 25T no good where I live - and apparently has only had moderate use. No obvious signs of distress/wear/heavy use but as I've not used or had it from new - £11 posted

Hi - I have a 2014 Crox de Fer, on which I've covered around 3.5k miles so far. Recently, gear change hasn't been as smooth as always... sometimes takes a couple of clicks, or occasionally it feels like there's tension in the chain and then a jump, even more so when going up hill. I've checked...

Bought a beat-up Giant XtC 3 mtb , for £30 in fleabay auction today, Needs a complete overhaul but I'm up for it, http://www.thebikelist.co.uk/giant/xtc-3-2012 however... the previous guy has swapped the rear wheel to some junk one,probably used the good one for something else. there's one huge...

Hi, went to resurrect my roadie today only to find the washer/shim/spacer that goes onto the spindle before the cassette is missing. Probably between the decking outside my shed. Been trying to source a replacement online to no avail. Anyone got any idea what it's called? It's for a Shimano 10...

So, my winter bike is at my folks, so don't have to hand to look at. It does however need a new cassette; Google tells me that I need an 11-32 8 speed. Rest of drivetrain is Shimano Altus/Alivio...can I use a SRAM 8sp 11-32 cassette?

Used but plenty of life left. Cheapest online in excess of £50 £16 posted View: https://www.instagram.com/p/BhHrmVogEf7/

Hi, I wish to replace the 10 speed 11-25 cassette on my road bike with one that goes up to 32 so I can do some seriously good climbing. As far as I see Shimamo only make the 105 in ratios up to 28. Any suggestions would be gratefully received. I already have the longer rear mech, which I will...

Has anyone fitted one of these to an Ice trike. I have a 20" Trice TNT and have thought about fitting one of these to allow me to fit a shorter drop rear derailleur.

Morning folks, My Btwin bike has a typical 10 speed Tiagra 4700 groupset with compact crank. I'm thinking of putting an alternative cassette on a spare rear wheel for the very hilly stuff; The current setup is an 11-28 cassette, I've got an 11-32 cassette which I'm hoping I can use... the bloke...

Bit of an odd one this I think. I have a new set of wheels (falcrum racing 5), and a new cassette. No matter how hard I try im unable to tighten it enough - the individual cogs have slight movement on them, and I can see a gap between them of about 1/3 a mm. Its a very slight gap, but a gap all...

Hi, I have an old Viking Racing Pro bike that I use on my turbo - it`s a 7 speed job. The back wheel is absolutely goosed and needs replacing. Luckily, I have an even older Viking Giro d`Italia again 7 speed with it`s back wheel intact and in relatively good condition. Now, given that both...

I'm getting my RT-58 ready for some hilly rides, and since I'm not much of an uphill rider, I'm changing the current 11-28t cassette to an 11-32t. Current RD is a short cage, so I've got a long cage one to replace it with, along with a new, longer chain. I have no concerns with changing from the...

I've brought the summer bike out of storage after my off in October. Cleaned it down and started to look at stripping components for replacement where necessary. I didn't clean the bike before it went into storage which has result in a thick, viscous layer of gunk and grime caked on the chain...

I am seriously out of my depth on this one but can anyone tell me what the issues are likely to be if l try to run a 50 40 30 crank with an 8 speed cassette. Would l need double or triple shifters and what size chain etc etc. Forgive my ignorance but lve not tried this combination before !

Hi all, this is on the whyte montpellier hybrid. I've been having some shifting issues in the lower 3-4 gears in both the big and small ring, needing a little extra push on the shifter to get it into the next lowest gear (biggest cog), also a little bit of chatter. I'd been fiddling with...

11-32 cassette. £32. Medium cage rear derailleur. £40. £70 for both. Both removed from a brand new bike prior to use Prices include postage to UK standard postcodes.

My bike has Sora 9 speed with an 11/32 Cassette. For an upcoming hilly event I would like a 34 tooth cog on the cassette. I have a useable 11 /34 10 speed 105 cassette in the shed .Can I just leave off the smallest (11 tooth) cog and fit it on my 9 speed hub? I know a Sora Cassette is only...

NOW SOLD Brand New in the box, never fitted. Bought for a project that never happened and lost the receipt. £40 posted. NOW SOLD.

New Year clear out yields the following for re-homing. Prices include postage to standard UK locations (excl. Highlands, Isle of Mann, Channel Isles etc.) and Paypal fees. Happy to combine postage for multiple items. Payment via Paypal only please (not Paypal gift). Loads of pics here...

Less than 20miles use 11-25 £15 posted

5800 11sp cassette. Been on a bike but never used (not an inch) so in brand new condition. Please note this cassette has no sprocket spacers hence uber bargain Xmas special price! £20 posted

Hi and TIA Can I use a 12T 5800 11s sprocket to replace the missing sprocket of the same size (seems to fit perfectly) on the 4600 10sp cassette? Does anyone have/where can I get the plastic cassette sprocket spacers? I have the sprockets and lock ring for both cassettes (depending on Q1...