Vision Tri max crankset.

[Milzy]

I’m assuming this crankset will fit Shimano bottom brackets? How do these ones install?

 

[Jenkins]

Hollowtech style BB?
If so an 8mm allen key in the non-drive side crank does the tightening.

 

[si_c]

Need to check axle size - diameter looks to be 30mm but what's the bearing spacing? - so could be one of a half dozen different BB types.

 

[Milzy]

Need to check axle size - diameter looks to be 30mm but what's the bearing spacing? - so could be one of a half dozen different BB types.

It’s a 24mm spindle so I’m assuming any Hollowtech BB.

 

[si_c]

It’s a 24mm spindle so I’m assuming any Hollowtech BB.

I would have thought so.

 

[Milzy]

I’ve found this bottom bracket so I’m not sure if it needs this or will work with my Shimano one.
https://www.santafixie.co.uk/fsa-bb...=Velkashopping.com+(UK)+-+Google+Shopping+CSS

 

[Milzy]

It’s working on an Ultegra BSA bottom
Bracket. Went in with a small tap. Hoping there’s not too much pressure on the bearings, there’s no washers/spaces just crankset to BB.