Agreed. I change mine once a year. Approx 6500+ miles.600 miles is an incredibly short life for a chain
Agreed. I change mine once a year. Approx 6500+ miles.600 miles is an incredibly short life for a chain
An "Up and Go" is basically a single Weetabix mashed with some milk.@Lovacott, I’ve got temporary crowns at the moment over my four lateral teeth while I await Emaxx crowns. It’s partly cosmetic and partly for dental corrections from a previous trauma as a teenager. I am on soft food and tepid liquids so these are great for me. I understand children abusing them though as they are up all night doing minecrafting stuff!
[label] NSFW [\label]
What's your set up and what terrain are you covering?Agreed. I change mine once a year. Approx 6500+ miles.
We have a metals bin at work so all of my metal bits go into that.Do you recycle all those part used chains?
You'd think so, but my commute is over some pretty rough roads with a fair bit of slurry on the surface.
I do a chain check every week and I get down to about 0.50% wear after about 500 miles.
Seeing as how chains are a lot cheaper than chainrings and freewheels, I err on the side of caution and do a chain swap.
It's a five minute job and it's really no bother.
10 speed all weathers road commuting through the mean, potholled streets of London. I keep my gear religiously clean and lubed otherwise road grime, salt and grit will eat it far quicker.What's your set up and what terrain are you covering?
I've covered this before. A fair chunk of my ride is on gravel farm roads covered in cow dung so my drivetrain gets pretty filthy.Even my mtn bike chain which saw much worse conditions lasted between 2-3 times that mileage.
It's also a very hilly route (Devon) so the stresses on the chain are greater than they would be on a flat commute.
Can you tell me where I said that my chain wear was caused exclusively by riding a hilly route?That's absolute rubbish - sorry. It's your grubby roads and only cleaning the drive chain once a week that's causing it.
Can you tell me where I said that my chain wear was caused exclusively by riding a hilly route?
As for the grubby roads, I'm well aware that they are the main cause of the issue but as far as I'm concerned, I'd rather spend five minutes and £13 every six hundred miles changing the chain than spend 20 minutes every evening cleaning it and re-applying lube.
I've found that by keeping the chain below 0.5% wear, the chainrings and cassette don't wear too much.Then add in cost of cassettes and chain rings by not doing it often enough. Wet or dirty rides, every ride. Just saying.
I've found that by keeping the chain below 0.5% wear, the chainrings and cassette don't wear too much.
I'd rather spend £200 per year on drivetrain parts than the same amount on cleaning solutions and lubricants along with the 20 minutes or so after every ride actually cleaning the thing.
Correct.20 mins cleaning after every ride is a bit excessive