B Screw replacement SORA R3000

[roubaixtuesday]

Upon fettling today, discovered the B screw is bent to buggery (technical term)

Anyone know what I need to replace it with and where to source? Can't find one at SJS:

https://www.sjscycles.co.uk/gear-spares-shimano-rear-derailleurs

 

[andrew_s]

I believe that the B-screw is standard M4 threading (0.7 mm pitch, coarse), and any replacement of a suitable length will do

 

[roubaixtuesday]

I believe that the B-screw is standard M4 threading (0.7 mm pitch, coarse), and any replacement of a suitable length will do

Thanks.

So this should do?

https://www.sjscycles.co.uk/gear-sp...0-end-adjust-bolt-plate-m4-x-193mm-y3hm98040/

 

[C R]

Thanks.

So this should do?

https://www.sjscycles.co.uk/gear-sp...0-end-adjust-bolt-plate-m4-x-193mm-y3hm98040/

It doesn't need to be a Shimano screw, any M4 screw of the right length will do. You probably have some knocking about in your garage, I know I do.

 

[si_c]

It doesn't need to be a Shimano screw, any M4 screw of the right length will do. You probably have some knocking about in your garage, I know I do.

Yeah, pretty much. Halfords do them for a quid or so for two.

 

[Ming the Merciless]

Yeah, pretty much. Halfords do them for a quid or so for two.

How much? 😳