Andy's Modelmaking Misadventures

[Andy in Germany]

The weather is so nice. Shouldn't you be outdoors cycling?

It was raining yesterday

 

[Gwylan]

It was raining yesterday

You say that. It was sunny where I am.
Do I have to check everything?

 

[Andy in Germany]

I may have got a little carried away buying parts for this project.

 

[Andy in Germany]

After the last burst of progress, I decided I wanted a few changes on the ship. The Poop deck, at the back of the ship, (& apparently the origin is exactly what you were thinking) was a bit too small, so I extended it by making the “cargo hatch” a bit smaller. This will allow me to extend the cabin a small amount, giving my characters more space for the purpose of engaging in fisticuffs or similar.

Of course, the deck now had a dirty great join right across it and I’d also forgotten to score in the planking, which is why it now sports this rather fetching green addition with cosmetic planks duly applied. The “snooker table” look is because, like a lot of my materials, the card was “strategically acquired” so it comes in all colours. At least this time it isn't covered in stars. Or unicorns.

To my surprise, fitting the decks wasn’t the endless trial and multitude of errors I’d expected, but it made up for that with the battle to cut straight slits in the bow and the stern for the mooring lines. It turns out that 2 1/2 mm of shellac-soaked card is pretty solid, and making consistent holes is difficult without a straight edge to cut against. Fortunately I was able to tidy the holes up to my usual standard of “I can hide it with weathering”, and I’m sure you won’t tell anyone about it, will you?

 

[Punkawallah]

View attachment 767881

After the last burst of progress, I decided I wanted a few changes on the ship. The Poop deck, at the back of the ship, (& apparently the origin is exactly what you were thinking) was a bit too small, so I extended it by making the “cargo hatch” a bit smaller. This will allow me to extend the cabin a small amount, giving my characters more space for the purpose of engaging in fisticuffs or similar.

View attachment 767882

Of course, the deck now had a dirty great join right across it and I’d also forgotten to score in the planking, which is why it now sports this rather fetching green addition with cosmetic planks duly applied. The “snooker table” look is because, like a lot of my materials, the card was “strategically acquired” so it comes in all colours. At least this time it isn't covered in stars. Or unicorns.

View attachment 767883

To my surprise, fitting the decks wasn’t the endless trial and multitude of errors I’d expected, but it made up for that with the battle to cut straight slits in the bow and the stern for the mooring lines. It turns out that 2 1/2 mm of shellac-soaked card is pretty solid, and making consistent holes is difficult without a straight edge to cut against. Fortunately I was able to tidy the holes up to my usual standard of “I can hide it with weathering”, and I’m sure you won’t tell anyone about it, will you?

Don’t worry about the ragged holes - you can always cover them with ‘reinforcing plates’ ;-)

 

[simongt]

I've been an enthusiastic model maker for years, revived after a long break form childhood memories of Airfix kits.
But oddly, despite having about twenty kits awaiting assembly, I've gone off the boil and haven't done one in some time.
Daresay the bug will bite again - !