campagnolo

I bought some 10-speed Campagnolo shifters from somebody on the forum a couple of years ago and now want to put them on my old Basso to convert it to 10-speed. It was 9-speed up until last autumn when I took it out of service . I removed the worn-out Ergopower controls from that bike, scrapped...

hi i know this is frowned upon but is it possible nowadays to put a shimano/sram 11 speed cassette onto a campag athena 11 speed set up ? my favourite bike has a campag set up and my other is shimano , i want to go and play on a mountain but campag only go up to 29/30 t cassette i am...

I am currently running a Campy9speed triple 52 42 32,The cassets largest cog is 26 9 speed..I would like to change the cassette to lower the gearing,perhaps a 30 or 32 largest cog..The largest I can find is a 29. Dos any one know if such a campy cassette exists and if so who the supplier is...

Hi folks... For my current project I kind of need to sort out an 7/8-speed Campagnolo setup... for perfectly good aesthetic/pose reasons I'd like to use Syncro (II) gear shifters.... my issue is I need to deal with 32 teeth's worth of chain wrap... kicking around in the box is a rather tatty...

I've somehow managed too loose the tapered pedal insert (washer) off my Centaur chainset. Does anyone know where I can get one or if there is a fix that can be done? Seems a shame to bin a perfectly working chainset for such a small part!.

Hi folks, I'm about to embark on a rebuild of some high-flange Campy Chorus hubs prior to their installation in my latest project Brompton (yes, I know). As the rear wheel is getting a new axle (it's currently 122mm OLN, I need it to be about 130 to accommodate a 7-speed freewheel) I'm planning...

Hi folks, does anyone have a diagram of a Campy High-flange rear hub. They were sold to me as Chorus, though there isn't anything written on them to say so, apart from the Campagnolo branding. The OLD seems to be 123mm, I'm hoping I can grow that to 126mm to get a 7-speed freewheel on, but the...

Hi folks, does anyone know if there's an exact model Park Tool to fit the non-drive side of the old loose-axle Campagnolo bottom brackets... I've just bought an Athena and it uses a pin-spanner rather than what I consider to be a normal bottom bracket tool. I know they do several adjustable...

Anybody know what the difference is between a PS double and a FB/QS triple shifter in terms of cable pull? Basically I want to know if I can use an 11sp PS double shifter with a 10sp FB triple front mech to shift an 11sp chain between the two inner rings of a 10sp triple chainset.

As I'm going to sell my only bike with Campy kit, I don't need the spares anymore. Campagnolo Veloce 10 Speed Cassette (11-25T) --- SOLD --- brand new and unused. Wiggle sells it for 44.99 pounds. (RVP according to them 63.49 pounds)...

Hi to all of you. I have just purchased a new Campagnolo Veloce Double front derailleur for use on my newly acquired 50cm Bianchi Via Nirone 7 Alu Carbon frame. I intend to use it as a triple with my Campagnolo Veloce Flat bar Shifters - bought some 4 years ago but never commissioned. Now I...

FFS I've been at this for over an hour. Previous Dia Compe shifter fell apart during my last race, obviously three times outdoors was too much for it. And made for an IM70.3 UK 'interesting' bike leg. All easy so far...despite having to replace the nearly new gear cable as well...then...

I have got Campagnolo Xenon gear mechs with a 9-speed freewheel. Can I use a front mech bar end shifter intended for use with a 10 speed rear shifter on my front mech? Sorry for the poor explanation!

My wife is 'de-cluttering' so I've got some Campagnolo product catalogues that need a new home. 2005, 2006,2007,2008, 2009 and a 2004 spare parts catalogue. No tears, rips or loose pages but far from pristine. Anyone want them for the price of the post before I chuck them in the bin? (Estimate...

Anyone?

I've had about twelve thousand miles of very mild, slow riding out of it. I always replace my chains when they reach 0.5% stretch. I think I've gone through about four or five chains on it. I don't want it, but if you do, whether to stick it on your bike or turn it into a Heath Robinson...

Hi guys, So as you may have seen on my other selling add i am moving to Shimano so this involves getting rind of my wheels aswell, These have been used for 500 miles in dry condiditons, Full carbon super light wheels. Comes with wheel bags, pads and qrs, Best price online is £1250 so...

Hi Guys, I have decided to move to the new Dura Ace so it is time to sell on my Campag Groupset, It consists of the following; Levers (Road) Front Mech Rear Mech Front and Rear Brakes Has been used for around 500 miles so in good condition, There is a mark of the rear brake from a...

Is there a Gripshift to operate the Campagnolo Xenon road gear mechs? I think it's 9 speed rear and 2 chainrings at the front.

I am struggling to get the rear and front campy derailleurs on the rebuilt Copi to function as they should and l just can't see what lam doing wrong. If l attach a short video file to show you guys the problem would you be kind enough to let me have your verdict ?

If anyone is interested, Low start price you could get a bargain,:okay: http://www.ebay.co.uk/itm/322490151049?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

I have a nine speed block does anyone know how many "teeth" should be on my, disassembled, lever ratchet, there are 8 so do I need new levers?

Campag Record braze-on front derailleur - new - 10 speed carbon: http://www.ebay.co.uk/itm/162428483226 Campag Record 10 speed rear derailleur - carbon: http://www.ebay.co.uk/itm/162428483285 Swissstop GHP II Campag brake pads - new: http://www.ebay.co.uk/itm/162428483366 Miche...

I have some Campagnolo Xenon bits but I would really like to know if anyone has a 170mm long, left side crank arm mine is missing? Also what tools do you really need to install the bottom bracket? The Campagnolo instructions list lots of tools but I suspect far less are actually needed. Does...

Vintage Viner Record Gold Road Bike 70s This nice Viner Record has the Golden Thread: Golden Muffs Golden Crank Dust CapsGolden "Viner" Stem Pantography Golden San Marco Saddle Badge Golden Fork Ends Golden Chain Stay Drop Outs Golden Seat Clamp The Golden Details fit very well with the...

I assume that the Nuovo Record, Victory and probably even Modolo ones would fit... but has to be Celeste.

Has anyone got Campy (or any other make) 8-speed brifters to work with a Sturmey 8-speed hub? Far more interested in tried and failed than someone saying it won't work without giving a good mechanical reason or any of the Campy tifosi who hate me for bolting a Centaur carbon compact Ultratorque...

As it says, I'm hoping to match the headset to the bottom bracket, but I need 1 1/8" threaded... See plenty of thread less or threaded 1".... Did Campy ever make the bigger one in threaded?

Does anyone know which adapter kit I need to put a Campagnolo Ultratorque crankset (in this case a Chorus Compact Carbon, but they are all the same dimensions) into a Chris King bottom bracket? IT's going into a 68mm English threaded BB, though, once again, I doubt that makes any difference.

Hi folks... Well I've managed to put a Campy Ultratorque in my Brompton but I have an issue... if I tighten the axle screw up to stated torque (55nm) then the pedals are very stiff to turn, it reminds me of the sensation after I overtightened the old cup and cone bottom bracket on my Raleigh...