Voodoo Bizango 2016, correct front mech?

[Cyrill666]

Hi folks,

Looking to replace a front mech on a 2016 Voodoo Bizango. Any recommendations?

A spec sheet i found states Deore M610, but there seems to be quite a few options.

Would this work : https://www.wiggle.co.uk/shimano-deore-m618-high-clamp-band-on-front-derailleur

The bike is 2x10 if that helps.

Thanks.

 

[Cycleops]

I'm assuming it's a band on type and not a braze on fitting and bottom pull?
The one you have linked is s high band spec which means it fixes higher up the seat tube than normal to clear any bottle mount fittings if they are low and would interfere with a regular fitting.
The only thing to do is look at Shimano's technical sheet and see if the dimensions would suit your dear tube. If you have no bottle mounts to worry about you should be fine.

 

[Sharky]

Check the diameter of the seat tube.
The one you've linked to is 28.6 and a top pull?