turbo issues -gear shifting

[cyberknight]

When i use my turbo i use another wheel + cassette but the shifting is wa off compared to my normal wheel.Both are r501s .

I do know the cable needs repalcing as the shifting is not crisp on the road anyway but the turbo ratlles into the big cog and i have todouble shift to the smaller sometimes so its not briliant either way on the turbo .

Is the clamping force on the frame affecting it ?

 

[Smokin Joe]

Different wheel is the key. Hubs are not all the same dimensions and the cassette can sit further in or out in relation to the mech.

 

[cyberknight]

Different wheel is the key. Hubs are not all the same dimensions and the cassette can sit further in or out in relation to the mech.

same wheel on each , both r501s

 

[Smokin Joe]

Strange.

It has nothing to do with clamping the Q/R, however.

 

[gazza1286]

Same cassette? Any spacers fitted?

 

[screenman]

For overall quality changing, when did you last check rear mech alignment.

Have the cassettes both got the same amnount of wear on them?

 

[cyberknight]

Same cassette? Any spacers fitted?

For overall quality changing, when did you last check rear mech alignment.

Have the cassettes both got the same amnount of wear on them?

Same cassette but different wear, mech hangers fine as i check alignment when i take the wheel out to clean it .

 

[stumpy66]

Tried to adjust the indexing a touch?