HarryTheDog
Guru
- Location
- Basildon Essex
I am putting my Felt TK2 2010 fixed gear Track bike up for sale as it has not been used for the last 3 years. Size small 52cm top tube, 52cm seat tube
It is original spec apart from the Chainring is now a Miche Advanced 49T ring. I still have the original 48T chainring and it will be included. Also included is a set of Miche Tubular Pistard wheels with fairly new Challenge Pista 22mm Tub tyres glued on. The good, very lightly used bike originally me and my son rode it just a handful of times, then my daughter rode/raced it for just 2 seasons. Never been on the road only velodromes, never had brakes fitted etc. From 6ft away it looks like a brand new bike, the present 2016 bikes are virtually the same apart from the wheels. Current RRP 1599 ( you can get them for less) I am asking 400 quid. ( look pedals not included)
The only damage to the paint is spanner marks around the wheel bolts, very slight discoloration blemishes you have to look for, saddle has 2 scuffs, the original wheels have some slight grubby marks on the decals. The Miche tub wheels have one of the decals slightly rubbed but the wheels are straight and undamaged, slight glue blemishes
. The bar tape is grubby but you would want to change that anyway. The original rear wheel has 2 slight marks on the hub where the chain came off once.
If you are on the short legged side the aero seatpost will be too tall but I have an aero aluminium campagnolo post that will go a lot lower.
I can deliver Essex/East London ( I work in Canary wharf) and am prepared to post at cost ( I don’t have a box yet). If no interest on the forum I will ebay it. Hopefully I haven't forgotten anything.
Finish:
Gloss White, Black,
Size 700c x 52
Weight:16.06 pounds (56cm)
Frame:
Track Specific custom butted Superlite 7005 smooth welded aluminum tubes; full aero 70mm deep seat tube with rear wheel recess & semi-aero downtube; bladed monostay & aero seatstays; horizontal CNC dropouts with stainless steel inserts
Fork:
Felt Track Specific carbon fiber with 1-1/8" aluminum steerer & oversized carbon fiber fork blades; 25mm offset with drilled crown for front brake
Headset:
FSA 1 1/8 Integrated w/ 20mm Cone & 2 X 7.5mm Spacer Stack
Stem:
Felt 3.1 White 6061 Aluminum 3D Forged Ø31.8mm w/ +/-8° Rise, 52cm=90mm, 54cm=100mm, 56-58cm=110mm, 60cm=120mm.
Handlebar:
Deda Pista Aluminum , Ø31.8mm, 420mm
Grips:
Felt Gel Ribbon Cork Tape w/ Felt 3D Logo
Bar Ends:
Bubble-Tech FE LT Logo End Plugs
Crankset:
SRAM TruVativ Omnium Track, 2-PC, Cold Forged Aluminum, Polished & Mirror BLACK Anodized w/ GOLD CNC Aluminum Chainring 48T x 1/8; 52cm-54cm=165mm, 56cm=167.5mm, 58cm=170mm, 60cm=170mm
Bottom Bracket:
SRAM GXP Team External 68mm
Chain:
KMC Z510HX Track 1/8 width
It is original spec apart from the Chainring is now a Miche Advanced 49T ring. I still have the original 48T chainring and it will be included. Also included is a set of Miche Tubular Pistard wheels with fairly new Challenge Pista 22mm Tub tyres glued on. The good, very lightly used bike originally me and my son rode it just a handful of times, then my daughter rode/raced it for just 2 seasons. Never been on the road only velodromes, never had brakes fitted etc. From 6ft away it looks like a brand new bike, the present 2016 bikes are virtually the same apart from the wheels. Current RRP 1599 ( you can get them for less) I am asking 400 quid. ( look pedals not included)
The only damage to the paint is spanner marks around the wheel bolts, very slight discoloration blemishes you have to look for, saddle has 2 scuffs, the original wheels have some slight grubby marks on the decals. The Miche tub wheels have one of the decals slightly rubbed but the wheels are straight and undamaged, slight glue blemishes
. The bar tape is grubby but you would want to change that anyway. The original rear wheel has 2 slight marks on the hub where the chain came off once.
If you are on the short legged side the aero seatpost will be too tall but I have an aero aluminium campagnolo post that will go a lot lower.
I can deliver Essex/East London ( I work in Canary wharf) and am prepared to post at cost ( I don’t have a box yet). If no interest on the forum I will ebay it. Hopefully I haven't forgotten anything.
Finish:
Gloss White, Black,
Size 700c x 52
Weight:16.06 pounds (56cm)
Frame:
Track Specific custom butted Superlite 7005 smooth welded aluminum tubes; full aero 70mm deep seat tube with rear wheel recess & semi-aero downtube; bladed monostay & aero seatstays; horizontal CNC dropouts with stainless steel inserts
Fork:
Felt Track Specific carbon fiber with 1-1/8" aluminum steerer & oversized carbon fiber fork blades; 25mm offset with drilled crown for front brake
Headset:
FSA 1 1/8 Integrated w/ 20mm Cone & 2 X 7.5mm Spacer Stack
Stem:
Felt 3.1 White 6061 Aluminum 3D Forged Ø31.8mm w/ +/-8° Rise, 52cm=90mm, 54cm=100mm, 56-58cm=110mm, 60cm=120mm.
Handlebar:
Deda Pista Aluminum , Ø31.8mm, 420mm
Grips:
Felt Gel Ribbon Cork Tape w/ Felt 3D Logo
Bar Ends:
Bubble-Tech FE LT Logo End Plugs
Crankset:
SRAM TruVativ Omnium Track, 2-PC, Cold Forged Aluminum, Polished & Mirror BLACK Anodized w/ GOLD CNC Aluminum Chainring 48T x 1/8; 52cm-54cm=165mm, 56cm=167.5mm, 58cm=170mm, 60cm=170mm
Bottom Bracket:
SRAM GXP Team External 68mm
Chain:
KMC Z510HX Track 1/8 width