Sit bones

Page may contain affiliate links. Please see terms for details.

NotthatJasonKenny

Faster on HFLC
Location
Bolton
Measured them using the tin foil method, left with two ovals, the gap between the two peaks was 13cm but the inner gap on the oval it left was 10cm and the outer 16cm so what size seat?

I've already had the look at DFS joke thanks!
 

Globalti

Legendary Member
I don't understand your bit about inner and outer gaps.
 
OP
OP
NotthatJasonKenny

NotthatJasonKenny

Faster on HFLC
Location
Bolton
Well there were 2 ovals left on the foil, I measured the inner peaks at 13cm but the ovals left around the peaks were 10cm at closest and 16cm at widest, like this...
ImageUploadedByTapatalk1340631219.970239.jpg
 
OP
OP
NotthatJasonKenny

NotthatJasonKenny

Faster on HFLC
Location
Bolton
Found this elsewhere


09-23-05, 01:18 PM
The code on the back of the assometer specifies a 130 saddle for a sitbone center to center width of 100 mm or less, a 143 saddle for a sitbone center to center of 100 mm to 130mm and a 155 for a sitbone center to center of 130 or more.

Looks like the 155 for me then!
 
Top Bottom