Rusting

Page may contain affiliate links. Please see terms for details.

haye13

Active Member
Hi all,
. On my road bike I have a couple of parts that are starting to rusty (the bolts that hold the back wheel on for example) how can I get this of, someone said vinegar can remove rust ? And can anyone tell me why this is happening I clean my bike regular

Thanks in advance
 

fossyant

Ride It Like You Stole It!
Location
South Manchester
Blob of oil. Some parts can be a bit cheap
 

steve50

Disenchanted Member
Location
West Yorkshire
Hi all,
. On my road bike I have a couple of parts that are starting to rusty (the bolts that hold the back wheel on for example) how can I get this of, someone said vinegar can remove rust ? And can anyone tell me why this is happening I clean my bike regular

Thanks in advance
A dab of oil or vaseline on the bolts should protect them from rust, it is caused by the bike manufacturer using cheap steel components and like most unprotected exposed steel parts they will oxidize and start to develop surface rust.
 

Profpointy

Legendary Member
maybe over-cleaning with degreaser / detergent? Cleaning filth off is fair enough but I tend not to de-grease and do the oily rag wipe down - not on the wheel rims of course !
 

Gravity Aided

Legendary Member
Location
Land of Lincoln
Yes, vinegar can remove rust, as can Coca Cola. Chemical reaction between the oxides(rust) and the acetic acid in the vinegar. Takes some time, and will leave a bit of a brown sludge deposit on the article being de-rusted. This will wipe right off, and leave you with a part free of rust, but without a polished surface.
 

si_c

Guru
Location
Wirral
Yes, vinegar can remove rust, as can Coca Cola. Chemical reaction between the oxides(rust) and the acetic acid in the vinegar. Takes some time, and will leave a bit of a brown sludge deposit on the article being de-rusted. This will wipe right off, and leave you with a part free of rust, but without a polished surface.

Indeed. However contact with moisture and oxygen will simply cause the surface rust to reappear. You need to coat the surface with something to prevent oxidation occuring. Clear nail polish works well for me, it's like lacquer, I have a few spots on my road bike (steel frame) where the metal is showing under the paint, that's how I treat it.
 
OP
OP
H

haye13

Active Member
Replace them with better new ones and protect with a bit of oil :smile:

Shaun
Now that's an idea haha
 

MattDB

Über Member
I have a brake pad with a slightly rusted mounting bolt which sticks when I'm trying to set it up. I keep meaning to replace but forget. At the weekend I soaked it in cola for 36 hrs but didn't seem to do anything. I vote for new bolts and a drop of oil.
 
Top Bottom