RSP20

Page may contain affiliate links. Please see terms for details.

Plinsky

New Member
Good afternoon all,

Apologies for troubling you. I have lost the instructions on the RSP20 and I was wondering if anybody has one. I can remember pretty much all steps but there are two things I am not sure what they are.
Going through the set up is as follows:
1. Wheel size: happy
2. km vs. miles: happy
3. Number 23 displayed next to the bike flashes: what does this set?
4. Number 160 (below number 23) flashes: what does this set?

The rest I am OK with. Many thanks in advance for all your help and support and apologies for troubling you.

Best Regards,

Plinsky
 

paul04

Über Member
Have a read here, it might help you
http://sheldonbrown.com/cyclecomputer-calibration.html
 
OP
OP
P

Plinsky

New Member
Thanks guys - I had look at the sheldon website but it doesn't explain my queries: I have e-mailed Raleigh. Hopefully I will get a reply. I just don't know what those two particular settings are...
 

rockyraccoon

Veteran
Not sure about this... Is 23 the temperature and 160 service program (remind to replace parts n' lube chain after a preset distance is reached)?

I've got the RSP18 with cadence. The computer settings are:

Set wheel size
Km or M selection
12/24 selection
Set service programme

Raleigh are useless replying to emails.. I'll be very surprised if you get a reply..
 
OP
OP
P

Plinsky

New Member
Thanks rocky raccoon,
There is a setting between Km and M selection and the 12/24. It is not temp., Celsius, service or 12/24... I thought it might be weight (in pounds or Kgs)...?
 
OP
OP
P

Plinsky

New Member
OK, just heard back from Raileigh...we were close: it was actually age and weight in pounds! Thanks very much everyone!

Plinsky
 
Top Bottom