Removing Specs of Rust from Chain?

Page may contain affiliate links. Please see terms for details.

Young Un

New Member
Location
Worcestershire
Can this be done? When I last went out in the rain I got back and was wet, cold, and fed up and so the chain only got a brief wipe with my chain rag. Unfortunately I missed about three links and so they have formed little specs of rust on the outer plates. It's not affecting the shifting or anyhting but IMO it makes the chain look messy and I know that it is there and it bugs me. Is there anything I can do to get rid off it?


Cheers
Steve
 

Joe24

More serious cyclist than Bonj
Location
Nottingham
Yeh, wipe the chain again.
Ive had it happen before, good wipe of the chain and they are gone.
 
OP
OP
Young Un

Young Un

New Member
Location
Worcestershire
Ah ok cheers Joe, I need to remove the chain after my ride today anyway as I am cleaning the bike so I will give it a good scrub/wipe. Need it to be in tip top condition for my Regional School of Racing tomorrow!
 

Joe24

More serious cyclist than Bonj
Location
Nottingham
You remove your chain:wacko:
I just take off the wheels sometimes.
A good wipe with your normal rag will get rid of the rust. Like how you do it when you give it a cleaning before oiling it again.
Whats the point in ****ing about taking it off:wacko:
 

Joe24

More serious cyclist than Bonj
Location
Nottingham
Young Un said:
100 miles a week including racing on a tuesday and on a friday, and therefore two rest days! Be quiet:biggrin:

****ing wow, 100 miles a week:rolleyes:
Your not doing much are you
 

Joe24

More serious cyclist than Bonj
Location
Nottingham
Young Un said:
It's enough Joe;) You don't need to do mega miles to be mega fast!

Nope.
Very true.
So how much do you do on a normal day? How much do you do in an average race?
 
OP
OP
Young Un

Young Un

New Member
Location
Worcestershire
Joe24 said:
Nope.
Very true.
So how much do you do on a normal day? How much do you do in an average race?

I don't do very many Crits; I focus on TT's and track, and for the latter I don't know how fast I go as I don't have a computer fitted to the Dolan. But it is quick: I am on 48:15 so about 86" and probably get that up to about 130 rpm across the line, and you have to pace yourself aswell as there are four seperate races at each event.
 

Joe24

More serious cyclist than Bonj
Location
Nottingham
Young Un said:
I don't do very many Crits; I focus on TT's and track, and for the latter I don't know how fast I go as I don't have a computer fitted to the Dolan. But it is quick: I am on 48:15 so about 86" and probably get that up to about 130 rpm across the line, and you have to pace yourself aswell as there are four seperate races at each event.

So how much do you do on a normal day? How much do you do in an average race?

Im talkign distances.

48:15. Pah, i have either 48(might be a 46) and 13t sprocket on the back of my TT bike;)
 
OP
OP
Young Un

Young Un

New Member
Location
Worcestershire
Joe24 said:
So how much do you do on a normal day? How much do you do in an average race?

Im talkign distances.

48:15. Pah, i have either 48(might be a 46) and 13t sprocket on the back of my TT bike;)

My training is normally based around 20 mile, with 40 mile club runs and the occasional ten mile effort. Average track races are: 8 lap points (2) / 10-15 lap scratch / kilo hanidcap / unknown distance / devil / keirin. All on a 400m track.

And with regards to gearing: I would go higher but with track you need to keep some acceleration capabilities so you can respond to and make attacks. I tried a bigger gear and it didn't allow acceleration so I meant back down a bit, whereas with TT you only need to accelerate once and so you can run a bigger gear.
 

montage

God Almighty
Location
Bethlehem
Joe24 said:
So how much do you do on a normal day? How much do you do in an average race?

Im talkign distances.

48:15. Pah, i have either 48(might be a 46) and 13t sprocket on the back of my TT bike;)


Being able to push a large gear means squat all
 

Joe24

More serious cyclist than Bonj
Location
Nottingham
montage said:
Being able to push a large gear means squat all

I can also spin a 72" gear to 33mph on the flat. And going downhill can do 41.8mph on a 72" fixed, which is 200rpm. And can also be going along the flat in a chain gang doing 28/29/30mph and spinning away.

Push a big gear, spin a gear.......................:thumbsup::thumbsdown:
 
Top Bottom