Mavic Allroads

[Replican]

Hi. I have an issue with my Mavic Allroad wheels. On my way into work the freehub started to slip. After about a mile of slipping, I lost all drive and had to walk home. I took the freehub off and cleaned the ratchet and all other parts. I applied a small amount of grease and reassembled everything. It worked for about 15 miles and then the problem returned as bad as ever. Does anyone have any experience with the Mavic id360 hub as I'm at a loss. Thanks in advance

 

[Cycleops]

I've read on here of similar problems with Mavic hubs. Maybe do a search of posts.

 

[bikingdad90]

Common problem with mavic wheels, if you want to keep the wheels the hubs are here. £45-£70.

https://shop.mavic.com/en-gb/freehub-body-oc0675.html#1040=3822

 

[Sharky]

Did you use grease or oil on the freehub pawls? Think a thin oil is the recommended lubricant. That what I used when I had the same issue.

 

[Replican]

Did you use grease or oil on the freehub pawls? Think a thin oil is the recommended lubricant. That what I used when I had the same issue.

I used grease. I'll strip it again and use oil and see if that makes any difference

 

[iluvmybike]

Grease will cause pawls to stick and not engage. Use a thin oil instead after you have cleaned grease off

 

[weareHKR]

I always prefer Marine Grease tbh... It's detergent/solvent resistant as it is waterproof...

 

[si_c]

Not sure if you've seen this already...
View: https://www.youtube.com/watch?v=eSR7luKf2t4