Just a quick question: Clear coating my vinyl decals.

Page may contain affiliate links. Please see terms for details.

Psyclist

Über Member
Location
Northamptonshire
I have vinyl decals for my restoration. I've applied two coats of clear coat on them already.

Should I apply another layer or two in 24 hours after the clear coat has dried for extra protection?

TIA, Psyclist.

p4pb9313823.jpg
 

screenman

Squire
What type of laquer, single pack needs 72 hours before fully cured, twin pack less so. Leave it for too long and you will be painting onto a smooth hard surface, not good. If you do want more build after a few days I suggest a quick nib down with 4000 grit or a very fine painters scotch pad ( not the household type) before spraying.

All credit to you, it looks a nice finish.
 
OP
OP
Psyclist

Psyclist

Über Member
Location
Northamptonshire
What type of laquer, single pack needs 72 hours before fully cured, twin pack less so. Leave it for too long and you will be painting onto a smooth hard surface, not good. If you do want more build after a few days I suggest a quick nib down with 4000 grit or a very fine painters scotch pad ( not the household type) before spraying.

All credit to you, it looks a nice finish.

Thanks. It's clear lacquer is all I know. It says on the can to leave for 24 hours to harden. I want to make sure the vinyl's aren't peel-able, so my theory was that the more layers, the better.
 

screenman

Squire
If it is a rattle can (aerosol) then it is single pack, and unfortunately not very hard wearing. Build it up too quickly and you will get solvent block, I would say you are doing it correctly in leaving plenty of time to harden before the next coat. Personally I would try and get a car sprayer to put a layer of twin pack over it.
 
OP
OP
Psyclist

Psyclist

Über Member
Location
Northamptonshire
If it is a rattle can (aerosol) then it is single pack, and unfortunately not very hard wearing. Build it up too quickly and you will get solvent block, I would say you are doing it correctly in leaving plenty of time to harden before the next coat. Personally I would try and get a car sprayer to put a layer of twin pack over it.

Only thing is they'll charge me a lot just to do it :sad: But I'll have a go at leaving it to dry, then apply more coats. As long as it's done well enough I'll be happy with it :thumbsup:

Cheers.
 

screenman

Squire
Most small bodyshops would flick a coat of laquer over that for £25 whilst they are doing something else. I promise you it would be worth it. Single pack laquer is very soft and will stay that way forever, you have a nice frame there. Penny worth of tar as they say.
 
OP
OP
Psyclist

Psyclist

Über Member
Location
Northamptonshire
Most small bodyshops would flick a coat of laquer over that for £25 whilst they are doing something else. I promise you it would be worth it. Single pack laquer is very soft and will stay that way forever, you have a nice frame there. Penny worth of tar as they say.

I will definitely think about it :thumbsup: but it won't be that soon if I do as I have other things to buy unfortunately. And I agree very much. I'm very pleased with the result so far.
 
Top Bottom