FSA Cranks and BB

Page may contain affiliate links. Please see terms for details.

Jimmy Welch

Senior Member
Hi Guys I'm replacing the chainring ony pals Cannondale it's got FSA 46 chainring and self thingy crank pushers sorry picture attached , when I roved the crank there was 2 spacers on the non drive side one hard plastic and the other steel , the steel one seemed very out of shape , is is meant to be like that , or shall replace with nice round one
 

Attachments

  • IMG_20210914_113753MP.jpg
    IMG_20210914_113753MP.jpg
    94.5 KB · Views: 9
  • IMG_20210914_114918MP.jpg
    IMG_20210914_114918MP.jpg
    117.3 KB · Views: 11
  • IMG_20210914_120231MP.jpg
    IMG_20210914_120231MP.jpg
    99.7 KB · Views: 11
  • IMG_20210914_121010MP.jpg
    IMG_20210914_121010MP.jpg
    66 KB · Views: 9
  • IMG_20210914_121041MP.jpg
    IMG_20210914_121041MP.jpg
    75 KB · Views: 11
  • IMG_20210914_121054MP.jpg
    IMG_20210914_121054MP.jpg
    116.6 KB · Views: 9

cyberknight

As long as I breathe, I attack.
is it a press fit BB ?
some have a wavy pre load washer on the non drive side
1631646273936.png
 

si_c

Guru
Location
Wirral
Put it on the left side last before fitting the arm.

Consequence would be improperly pre-loaded bearings in the bottom bracket and the crankset would have left to right play - you'd definitely notice this when riding.
 
OP
OP
J

Jimmy Welch

Senior Member
Put it on the left side last before fitting the arm.

Consequence would be improperly pre-loaded bearings in the bottom bracket and the crankset would have left to right play - you'd definitely notice this when riding.
Cheers does it go on inside or outside the other ring that's on there
 
OP
OP
J

Jimmy Welch

Senior Member
Cheers does it go on inside or outside the other ring that's on there
Sorry ignor that just re read you message it goes on last
 
OP
OP
J

Jimmy Welch

Senior Member
One last question the wave washer is there particular way round it goes in , is there a front and back to it ?
 
Top Bottom