Alloy long drop brakes for sale

[jay clock]

I took these off my Trek 1.2 as I wanted something better. They are no name shiny silver alloy in very good nick. The ones I replaced them with are described as 47-57mm reach. The ones I am selling fitted fine with mudguards. I can email a piccy if you want one.

Not sure how much they are new, but these have had 6 mths use, plus the pads were replaced not that long ago. £12.50 posted (post will be about £3 or £4) so that sounds like a bargain!

If not gone off here soonish I will stick on Ebay

Jay

 

[Panter]

Do you happen to know if they'll fit a Giant SCR3 2007? I'd like to take them if so but I don't know if the pads will line up with the rim (are they all a standard size?)

 

[jay clock]

Should be fine I would have thought. Can you measure the distance between the centre of the brake hole and the centre of the rim? I can then let you know

Jay

 

[Panter]

I'll certainly do that and let you know. Unfortunately I drove in today (have a lot of running around to do later) so I won't be able to do it untill this evening.

I'll let you know then if they haven't sold by then.

 

[Young Un]

I'll certainly do that and let you know. Unfortunately I drove in today (have a lot of running around to do later) so I won't be able to do it untill this evening.

I'll let you know then if they haven't sold by then.

If you want I can measure my Giant SCR2 (also 2007) if you want to know today?

 

[Panter]

If you wouldn't mind, that would be extremely good of you

I'll be out of the office now (and offline) for 2-3 Hours but if it turns out they'll fit, I'll commit to buying them and can paypal Jay this afternoon.

 

[Young Un]

Just been out to measure them:

I measured from the centre of the brake hole to the centre of the rim (da22's) and I made the back to be about 55mm and the front to be about 53mm and I measured generously so these brakes should be fine for you panter.

Hope this helps.
Steve

 

[Panter]

Just been out to measure them:

I measured from the centre of the brake hole to the centre of the rim (da22's) and I made the back to be about 55mm and the front to be about 53mm and I measured generously so these brakes should be fine for you panter.

Hope this helps.
Steve

That certainly does. Thanks Steve, thats very much appreciated.

 

[Panter]

Arrived this morning, in A1 condition and beautifully packaged, thank you very much