Adapter/extender for raising saddle?

Page may contain affiliate links. Please see terms for details.

ZaksDad

Senior Member
OK, let me try and explain this properly. Long story, but I have a bike with an integrated seat post, and it's been cut slightly to small for me. So I need to find a way of raising the seat/saddle height without having the option of raising the seat post.
So, before I put the bike on Ebay/sell it, is there any kind of adapter or extender that I can attach to the mech under the saddle, that will safely raise the seat height by up to an inch. I tried googling it, but can't see anything.

Thanks in advance for your help, any ideas?
 
D

Deleted member 35268

Guest
Some photos might help, we will be able to see the profile of the setup. Cheers
 

T4tomo

Legendary Member
Don't most integrated seat posts have some small adjustment by means of additional spaces where the saddle clampy thingy joins the top of the post? that should buy you 1-3 cms.
 
If it is a carbon fibre frame you could contact a carbon fibre repair place who could quite easily extend the seat tube. I suspect you would be looking at 100 quid plus though. I have used HQ fibre repair in norfolk who can do anything you want but probably a bit far for you. Note they probably won't colour match it.
 
OP
OP
ZaksDad

ZaksDad

Senior Member
If it is a carbon fibre frame you could contact a carbon fibre repair place who could quite easily extend the seat tube. I suspect you would be looking at 100 quid plus though. I have used HQ fibre repair in norfolk who can do anything you want but probably a bit far for you. Note they probably won't colour match it.
Yeah, might be worth looking at that, will check a few local places and see. Thanks.
 
Can't you just buy a new seat-post of the uncut sort?
The seat post is part of the frame, eg
081231.990.rombo.02.jpg
 

Globalti

Legendary Member
You can easily gain half an inch by changing your saddle as some saddles are higher above their rails than others.
 
Top Bottom