ChrisEyles
Guru
- Location
- Devon
I am finally getting around to selling one of the two Raleighs I restored a couple of years ago. After much deliberation I've decided to keep the 3-speed 1930s "Popular", and to find a new home for this 1950s "Sports".
Frame size BB centre to top of seat tube: 23" (would suit 5'6" to 5'10" I should think)
Wheel size: 26" x 1,3/8"
Brakes: Rod brakes
Gearing: 44t / 18t
This Sport is a single speed, 26" wheel model. It's a really fun bike to ride, and very much nippier than it looks at first glance. It also has a rather distinctive slightly downward sloping top tube to the frame, giving it a slightly racier look and feel to the bigger, heavier 28" roadsters. I've ridden it on some long 60+ mile hilly-ish rides and while you won't break any land speed records on it, you won't break too much of a sweat either.
The bike has been fully restored, which entailed the following:
Frame totally stripped down, de-rusted and re-painted
Bottom bracket, wheel hub, and headset bearings cleaned out and re-greased
New brake pads, new front rod brake stirrup, and new saddle (all other parts are original 1950s)
Bike serviced and tuned up (e.g. wheels trued, chain tensioned nicely, all bearings running nice and smooth etc)
Here's some pics of the restoration mid-way in progress.
I realise that for a lot of people a restored bike is never quite the same as the original, but in the end I'm glad I went down this route, and am very pleased with the results.
There's also an in-depth thread here on cyclechat here with all the gory details: https://www.cyclechat.net/threads/1940s-raleigh-rescue-should-i-or-shouldnt-i.168167/
Frame size BB centre to top of seat tube: 23" (would suit 5'6" to 5'10" I should think)
Wheel size: 26" x 1,3/8"
Brakes: Rod brakes
Gearing: 44t / 18t
This Sport is a single speed, 26" wheel model. It's a really fun bike to ride, and very much nippier than it looks at first glance. It also has a rather distinctive slightly downward sloping top tube to the frame, giving it a slightly racier look and feel to the bigger, heavier 28" roadsters. I've ridden it on some long 60+ mile hilly-ish rides and while you won't break any land speed records on it, you won't break too much of a sweat either.
The bike has been fully restored, which entailed the following:
Frame totally stripped down, de-rusted and re-painted
Bottom bracket, wheel hub, and headset bearings cleaned out and re-greased
New brake pads, new front rod brake stirrup, and new saddle (all other parts are original 1950s)
Bike serviced and tuned up (e.g. wheels trued, chain tensioned nicely, all bearings running nice and smooth etc)
Here's some pics of the restoration mid-way in progress.
I realise that for a lot of people a restored bike is never quite the same as the original, but in the end I'm glad I went down this route, and am very pleased with the results.
There's also an in-depth thread here on cyclechat here with all the gory details: https://www.cyclechat.net/threads/1940s-raleigh-rescue-should-i-or-shouldnt-i.168167/